¡@
2014/10/16 ¤W¤È 08:21:32
android Programming Glossary: portsSamsung Galaxy S II AVD (Android Virtual Device) Basic Settings? http://stackoverflow.com/questions/10641744/samsung-galaxy-s-ii-avd-android-virtual-device-basic-settings seem to use it at Internet hotspots that have certain ports closed slow to start and I just end up with blank black screens.. NFC put this back in if you have an S2 model that supports NFC Wifi d networking d sensors Compass Accelerometer GPS ProximitySensor..
Android TCP does not flush until socket is closed http://stackoverflow.com/questions/11847092/android-tcp-does-not-flush-until-socket-is-closed it will not open new port but instead re print the open ports information getIp System.out .println Server connected and..
Android 4.2.2 - adb offline, even after SDK upgrade http://stackoverflow.com/questions/15073165/android-4-2-2-adb-offline-even-after-sdk-upgrade and the devices themselves. Have tried using different USB ports and cables. I'm using the standard 'Android ADB Interface' drivers..
Android: How to integrate a decoder to multimedia framework http://stackoverflow.com/questions/15334509/android-how-to-integrate-a-decoder-to-multimedia-framework type video avc Quirk name requires allocate on input ports Quirk name requires allocate on output ports MediaCodec MediaCodec.. on input ports Quirk name requires allocate on output ports MediaCodec MediaCodec name OMX.google.h264.decoder type video.. In the given example requires allocate on input ports indicates to the Stagefright framework that the component prefers..
Remote debugging with Android emulator http://stackoverflow.com/questions/1754162/remote-debugging-with-android-emulator cmb mentioned but I can confirm that forwarding the TCP ports yourself &mdash such as over SSH &mdash works fine. The emulator.. SSH &mdash works fine. The emulator listens on two TCP ports per instance 5554 for the telnet interface and 5555 for control.. to restart adb in order for it to probe the local 5554 ports. Note that I was running an emulator locally too hence I had..
Changing the Android emulator locale automatically http://stackoverflow.com/questions/2417427/changing-the-android-emulator-locale-automatically You may also want to run emulators on know ports check my answer in this thread . Note that you can also set..
http://stackoverflow.com/questions/2661932/problem-with-bluetooth-on-android-2-1-samsung-spica-i5700-where-pairing-works rates and it is possible to choose between various COM ports as well as a .Net COM port. I did some testing on my Spica Android.. which is also a sport tracking application which supports heartrate monitor only with the HxM. There what looked like..
Android Debugging InetAddress.isReachable http://stackoverflow.com/questions/2935325/android-debugging-inetaddress-isreachable
The connection to adb is down and a sever error has occured http://stackoverflow.com/questions/4072706/the-connection-to-adb-is-down-and-a-sever-error-has-occured emulator both before and after Eclipse and searched for ports being used by other programs. What is going on here Is there..
Connecting 2 Emulator instances In Android http://stackoverflow.com/questions/4683854/connecting-2-emulator-instances-in-android m catch IOException e e.printStackTrace I redirected ports similar to you telnet localhost 5554 redir add tcp 5000 6000..
Peer-to-Peer communication options [duplicate] http://stackoverflow.com/questions/5041426/peer-to-peer-communication-options differently so you'd need to pay great attention to the ports you use especially considering many inbound ports are blocked.. to the ports you use especially considering many inbound ports are blocked by default for security reasons. share improve..
http://stackoverflow.com/questions/5904820/android-udp-communication never receives any UDP traffic from using either of the ports. java android udp share improve this question I had a similar..
How to add java.awt.image package in Android http://stackoverflow.com/questions/6344654/how-to-add-java-awt-image-package-in-android The Java AWT classes contain native code so unless someone ports that native code to Android you are out of luck. And they won't..
Samsung Galaxy S II AVD (Android Virtual Device) Basic Settings? http://stackoverflow.com/questions/10641744/samsung-galaxy-s-ii-avd-android-virtual-device-basic-settings online remote test lab but I've found that too restrictive can't seem to use it at Internet hotspots that have certain ports closed slow to start and I just end up with blank black screens anyway. So I'd really prefer to just run my own version.. capacitive d screen type d touch d screen d networking Bluetooth NFC put this back in if you have an S2 model that supports NFC Wifi d networking d sensors Compass Accelerometer GPS ProximitySensor LightSensor Gyroscope d sensors d mic true d mic..
Android TCP does not flush until socket is closed http://stackoverflow.com/questions/11847092/android-tcp-does-not-flush-until-socket-is-closed n catch IOException e if server is already running it will not open new port but instead re print the open ports information getIp System.out .println Server connected and waiting for client input n private static void getIp InetAddress..
Android 4.2.2 - adb offline, even after SDK upgrade http://stackoverflow.com/questions/15073165/android-4-2-2-adb-offline-even-after-sdk-upgrade even after several restarts of ADB using kill server the PC and the devices themselves. Have tried using different USB ports and cables. I'm using the standard 'Android ADB Interface' drivers from the SDK but have also tried the 'Android Composite..
Android: How to integrate a decoder to multimedia framework http://stackoverflow.com/questions/15334509/android-how-to-integrate-a-decoder-to-multimedia-framework be as below. Decoders MediaCodec name OMX.ABC.XYZ.H264.DECODER type video avc Quirk name requires allocate on input ports Quirk name requires allocate on output ports MediaCodec MediaCodec name OMX.google.h264.decoder type video avc Where a... type video avc Quirk name requires allocate on input ports Quirk name requires allocate on output ports MediaCodec MediaCodec name OMX.google.h264.decoder type video avc Where a. OMX.ABC.XYZ.H264.Decoder is the name of your.. denote the quirks or special requirements of your components. In the given example requires allocate on input ports indicates to the Stagefright framework that the component prefers to allocate the buffers on all it's input ports. Similarly..
Remote debugging with Android emulator http://stackoverflow.com/questions/1754162/remote-debugging-with-android-emulator previously tried or even noticed the adb connect command that cmb mentioned but I can confirm that forwarding the TCP ports yourself &mdash such as over SSH &mdash works fine. The emulator listens on two TCP ports per instance 5554 for the telnet.. that forwarding the TCP ports yourself &mdash such as over SSH &mdash works fine. The emulator listens on two TCP ports per instance 5554 for the telnet interface and 5555 for control communication with tools like DDMS. So you could probably.. tries to notify a local adb server at startup hence the need to restart adb in order for it to probe the local 5554 ports. Note that I was running an emulator locally too hence I had to use 5556. Also the localhost in the ssh command refers to..
Changing the Android emulator locale automatically http://stackoverflow.com/questions/2417427/changing-the-android-emulator-locale-automatically change was successful just use adb shell 'getprop persist.sys.language' You may also want to run emulators on know ports check my answer in this thread . Note that you can also set system properties directly when starting the emulator emulator..
http://stackoverflow.com/questions/2661932/problem-with-bluetooth-on-android-2-1-samsung-spica-i5700-where-pairing-works to 9600 IIRC though the connection also worked with higher baud rates and it is possible to choose between various COM ports as well as a .Net COM port. I did some testing on my Spica Android to try to find out why the bluetooth connection doesn't.. or with Android 2.1. I checked out another application Endomondo which is also a sport tracking application which supports heartrate monitor only with the HxM. There what looked like exactly the same error occurred I clicked on 'Connect Zephyr..
Android Debugging InetAddress.isReachable http://stackoverflow.com/questions/2935325/android-debugging-inetaddress-isreachable
The connection to adb is down and a sever error has occured http://stackoverflow.com/questions/4072706/the-connection-to-adb-is-down-and-a-sever-error-has-occured command line adb kill server the DDMS reset ADB I started the emulator both before and after Eclipse and searched for ports being used by other programs. What is going on here Is there a magic combo of versions of Eclipse Java adb emulator and..
Connecting 2 Emulator instances In Android http://stackoverflow.com/questions/4683854/connecting-2-emulator-instances-in-android input.readLine mClientMsg st myUpdateHandler.sendMessage m catch IOException e e.printStackTrace I redirected ports similar to you telnet localhost 5554 redir add tcp 5000 6000 My client code establshing connection on port 5000 public class..
Peer-to-Peer communication options [duplicate] http://stackoverflow.com/questions/5041426/peer-to-peer-communication-options it's rarely that simple as routers firewalls are configured differently so you'd need to pay great attention to the ports you use especially considering many inbound ports are blocked by default for security reasons. share improve this answer..
http://stackoverflow.com/questions/5904820/android-udp-communication 8000 Server Sending IDLE packet to XXXXXX 8000 The Android App never receives any UDP traffic from using either of the ports. java android udp share improve this question I had a similar problem. On the Android was two sockets sending listening..
How to add java.awt.image package in Android http://stackoverflow.com/questions/6344654/how-to-add-java-awt-image-package-in-android Thanks android image jar share improve this question The Java AWT classes contain native code so unless someone ports that native code to Android you are out of luck. And they won't port it because as it was pointed out above Android has..
|