2014/10/16 上午 08:27:21

android Programming Glossary: vid

http://stackoverflow.com/questions/11183792/android-usb-host-and-hidden-devices

platform sw ehci.1 usb2 2 1' 'usb' '' 189 133 I USB3G 92 path ' sys devices platform sw ehci.1 usb2 2 1' I USB3G 92 VID size 5 vid_path ' sys devices platform sw ehci.1 usb2 2 1 idVendor' VID '2226 I USB3G 92 '. I USB3G 92 PID size 5 Pid_path.. platform sw ehci.1 usb2 2 1' I USB3G 92 VID size 5 vid_path ' sys devices platform sw ehci.1 usb2 2 1 idVendor' VID '2226 I USB3G 92 '. I USB3G 92 PID size 5 Pid_path ' sys devices platform sw ehci.1 usb2 2 1 idProduct' PID '0014 I USB3G..

USB device access pop-up supression?

http://stackoverflow.com/questions/12388914/usb-device-access-pop-up-supression

id 26214 product id 26214 resources The vendor id and product id here have to be given in decimal above both the VID and PID are 0x6666. What I have given above also works for a USB accessory that is where the accessory is the USB host and..

What USB driver should we use for the Nexus 5?

http://stackoverflow.com/questions/19838016/what-usb-driver-should-we-use-for-the-nexus-5

google nexus share improve this question I have a solution. I updated the file android_winusb.inf to reflect the VID and PID of the Nexus 5 . Now it loads the generic driver and supports ADB in Eclipse. Note after any previous attempts you.. file android_winusb.inf in both the x86 and amd64 sections and insert one line CompositeAdbInterface USB_Install USB VID_18D1 PID_4EE1 MI_01 This was enough for me to get this to work. Here is the content of my file Android WinUsb driver installation... the Nexus 5 ADB jonovos petuniaPlatypus 2013 11 07 By snooping on the USB for the Nexus 5 it is known that the VID 18D1 and PID 4EE1. With this we insert them into the GENERIC sections bwlow. Version Signature Windows NT Class AndroidUsbDeviceClass..

Google Android USB Driver and ADB

http://stackoverflow.com/questions/9709263/google-android-usb-driver-and-adb

the format to add is Comment usually the device name SingleAdbInterface USB_Install USB here you put VID and PID CompositeAdbInterface USB_Install USB same as above but add the MI before i go on vid is the usb vendor id it doesn.. in new dialog go to Details tab in property drop menu select hardware ids. for example you see something like USB VID_2207 PID_0000 REV_0222 MI_01 USB VID_2207 PID_0000 MI_01 take this value for composite adb device and remove MI for single.. in property drop menu select hardware ids. for example you see something like USB VID_2207 PID_0000 REV_0222 MI_01 USB VID_2207 PID_0000 MI_01 take this value for composite adb device and remove MI for single adb device you get MSI WindPad Enjoy..