¡@
2014/10/16 ¤W¤È 08:10:29
android Programming Glossary: baudAndroid + Arduino Bluetooth Data Transfer http://stackoverflow.com/questions/10327506/android-arduino-bluetooth-data-transfer 53 LOW I've tried using 115200 and 9600 for the baud rates and I've tried setting the bluetooth rx and tx pins as.. mate tutorial.html also seems that 9600 is a good baud instead of 115200. Bluetooth test program TODO TEST THIS PROGRAM..
http://stackoverflow.com/questions/10429615/transferring-data-usb this question I was trying to send data over the wrong baud rate. Here's the code that works. Posting it for everyone who.. none conn.controlTransfer 0x40 0x03 0x0034 0 null 0 0 baudrate 57600 conn.controlTransfer 0x40 0x04 0x0008 0 null 0..
http://stackoverflow.com/questions/2661932/problem-with-bluetooth-on-android-2-1-samsung-spica-i5700-where-pairing-works It does. The Run.GPS application automatically sets the baud rate initially to 9600 IIRC though the connection also worked.. to 9600 IIRC though the connection also worked with higher baud rates and it is possible to choose between various COM ports.. here whether or not it's possible to experiment with the baud rate in Android etc. I still don't know if the problem is with..
How can I get the ADK DemoKit example working on a Google I/O Galaxy Tab 10.1? http://stackoverflow.com/questions/6355031/how-can-i-get-the-adk-demokit-example-working-on-a-google-i-o-galaxy-tab-10-1 if debug mode is on or off on the tablet need to set the baud rate to 115200 to read the output Device addressed... Requesting..
Android + Arduino Bluetooth Data Transfer http://stackoverflow.com/questions/10327506/android-arduino-bluetooth-data-transfer flashLED void flashLED digitalWrite 53 HIGH delay 500 digitalWrite 53 LOW I've tried using 115200 and 9600 for the baud rates and I've tried setting the bluetooth rx and tx pins as input output and output input. The Arduino is receiving serial.. code taken from http jondontdoit.blogspot.com.au 2011 11 bluetooth mate tutorial.html also seems that 9600 is a good baud instead of 115200. Bluetooth test program TODO TEST THIS PROGRAM WITH ANDROID CHANGE PINS TO RX AND TX THO ON THE ARDUINO..
http://stackoverflow.com/questions/10429615/transferring-data-usb to serial article by serverbox. android usb share improve this question I was trying to send data over the wrong baud rate. Here's the code that works. Posting it for everyone who is using FTDI devices and needs help. private Runnable mLoop.. 0x40 0x02 0x0000 0 null 0 0 flow control none conn.controlTransfer 0x40 0x03 0x0034 0 null 0 0 baudrate 57600 conn.controlTransfer 0x40 0x04 0x0008 0 null 0 0 data bit 8 parity none stop bit 1 tx off..
http://stackoverflow.com/questions/2661932/problem-with-bluetooth-on-android-2-1-samsung-spica-i5700-where-pairing-works Mobile as a control device to see if the HxM works there. It does. The Run.GPS application automatically sets the baud rate initially to 9600 IIRC though the connection also worked with higher baud rates and it is possible to choose between.. application automatically sets the baud rate initially to 9600 IIRC though the connection also worked with higher baud rates and it is possible to choose between various COM ports as well as a .Net COM port. I did some testing on my Spica.. in any tips including if I'm posting to the wrong forum here whether or not it's possible to experiment with the baud rate in Android etc. I still don't know if the problem is with the Run.GPS application I've posted already on the development..
How can I get the ADK DemoKit example working on a Google I/O Galaxy Tab 10.1? http://stackoverflow.com/questions/6355031/how-can-i-get-the-adk-demokit-example-working-on-a-google-i-o-galaxy-tab-10-1 UPDATE Here's what the Arduino serial monitor says regardless if debug mode is on or off on the tablet need to set the baud rate to 115200 to read the output Device addressed... Requesting device descriptor. found possible device. swithcing to..
|