¡@
2014/10/16 ¤W¤È 08:12:30
android Programming Glossary: disconnectMediaPlayer error (1, -1004) aka MEDIA_ERROR_IO trying to stream music on Samsung S3 http://stackoverflow.com/questions/16672568/mediaplayer-error-1-1004-aka-media-error-io-trying-to-stream-music-on-samsun 3921 setListener 05 21 16 26 57.930 V MediaPlayer 3921 disconnect 05 21 16 26 57.935 V MediaPlayer 3921 destructor 05 21 16 26.. 3921 destructor 05 21 16 26 57.935 V MediaPlayer 3921 disconnect android streaming android mediaplayer samsung mobile share..
Getting the battery current values for the Android Phone http://stackoverflow.com/questions/2439619/getting-the-battery-current-values-for-the-android-phone only if the phone is connected via USB interface. If I disconnect the phone I see the value of batt_current as '0'. I am not sure..
How to prevent Android bluetooth RFCOMM connection from dying immediately after .connect()? http://stackoverflow.com/questions/2660968/how-to-prevent-android-bluetooth-rfcomm-connection-from-dying-immediately-after second one that just sits there waiting for the device to disconnect after 5 seconds. And yes I do have third version which first.. test connects and waits useful for displaying the auto disconnect issue. Code public class ZeeTest extends Activity @Override..
Disconnect a bluetooth socket in Android http://stackoverflow.com/questions/3031796/disconnect-a-bluetooth-socket-in-android the connection . Are there any way to make a Bluetooth disconnection I think there is an intent called ACTION_ACL_CONNECTED which.. IOException e e.printStackTrace android bluetooth disconnection share improve this question Please remember to close.. close the socket. By closing the streams you kick off the disconnect process. After you close the socket the connection should be..
how to resume an interrupted download http://stackoverflow.com/questions/3411480/how-to-resume-an-interrupted-download web site server which apparently is setup not by me to disconnect downloads if they are not completed within 100 seconds. The.. occasions when the data rate is slow and the download gets disconnected is there a way to resume the URLConnection at the file offset.. to resume the URLConnection at the file offset where the disconnection occurred Here's the code Setup connection. URL url new URL..
How to programmatically tell if a Bluetooth device is connected? (Android 2.2) http://stackoverflow.com/questions/4715865/how-to-programmatically-tell-if-a-bluetooth-device-is-connected-android-2-2 action ... Device is about to disconnect else if BluetoothAdapter.ACTION_ACL_DISCONNECTED.equals action.. action ... Device has disconnected A few notes There is no way to retrieve a list of connected..
Force scan files after taking photo http://stackoverflow.com/questions/5107823/force-scan-files-after-taking-photo on android 2.1. If I connect device via USB to PC and then disconnect file will appear after finished scanning. So how should I start..
Example: Android bi-directional network socket using AsyncTask http://stackoverflow.com/questions/5135438/example-android-bi-directional-network-socket-using-asynctask in the TextView. In the case of http a web server will disconnect from the client once all the data has been sent. For other TCP.. data streams the connection will stay up until one side disconnects. Screenshot AndroidManifest.xml xml version 1.0 encoding utf..
http://stackoverflow.com/questions/5489671/ksoap-never-timeout Everything works fine but when I shutdown my Apache or disconnect remote PC on which Apache is running the call never times out...
ADB, Wifi and Eclipse: how I can configure? http://stackoverflow.com/questions/6069212/adb-wifi-and-eclipse-how-i-can-configure able to explicitly state which emulator device to use. To disconnect your device adb disconnect phone ip address share improve..
Wifi Connect-Disconnect Listener http://stackoverflow.com/questions/6362314/wifi-connect-disconnect-listener inorder to automatically check code if the wifi connects disconnects I'm able to manually check for wifi connection disconnection.. disconnects I'm able to manually check for wifi connection disconnection but each time i need to connect disconnect WIFI from android.. connection disconnection but each time i need to connect disconnect WIFI from android settings and then run my program for the result...
Send data from android to server via JSON http://stackoverflow.com/questions/6523761/send-data-from-android-to-server-via-json require_once '.. Connection.php' connect to a database disconnect handler. require_once '.. SendAPI.php' deals with sending querys... accelX accelY accelZ Disconnect from database. server disconnectDB This is an example I used recently. Just to note in the php..
How does setMicrophoneMute() work? http://stackoverflow.com/questions/6874881/how-does-setmicrophonemute-work in database being used When does this flag actually disconnect the microphone signal from the pre amplifier circuit inside.. up in the hardware specific mute microphone. The mic is disconnected when the hardware specific code has run except when in a call..
Android 3.1 USB-Host - BroadcastReceiver does not receive USB_DEVICE_ATTACHED http://stackoverflow.com/questions/6981736/android-3-1-usb-host-broadcastreceiver-does-not-receive-usb-device-attached you get an onResume. You can also set a flag when USB is disconnected because of course the USB disconnect intent fires just fine... a flag when USB is disconnected because of course the USB disconnect intent fires just fine. So in total your broadcast receiver..
Android: Taking complete control of phone(kiosk mode), is it possible? How? http://stackoverflow.com/questions/7121508/android-taking-complete-control-of-phonekiosk-mode-is-it-possible-how android name android.permission.READ_PHONE_STATE and disconnect the call programmatically try TelephonyManager manager TelephonyManager.. catch Exception e Log.d e.getMessage Note Add this file to disconnect the call http dl.dropbox.com u 31740476 ITelephony.aidl To disable..
How can i put my buttons like that? http://stackoverflow.com/questions/15235194/how-can-i-put-my-buttons-like-that param layout2.addView btnConnect Button btnDisconnect new Button this btnDisconnect.setText Disconnect layout2.addView.. btnConnect Button btnDisconnect new Button this btnDisconnect.setText Disconnect layout2.addView btnDisconnect btnDisconnect.setLayoutParams.. Button btnDisconnect new Button this btnDisconnect.setText Disconnect layout2.addView btnDisconnect btnDisconnect.setLayoutParams..
Disconnect a bluetooth socket in Android http://stackoverflow.com/questions/3031796/disconnect-a-bluetooth-socket-in-android a bluetooth socket in Android I'm developing a program in which..
Problems connecting with bluetooth Android http://stackoverflow.com/questions/4444235/problems-connecting-with-bluetooth-android 1 This is taken from the following question Disconnect a bluetooth socket in Android Regards Michael share improve..
Android - Run/install/debug applications over WiFi? http://stackoverflow.com/questions/4893953/android-run-install-debug-applications-over-wifi adb connect 10.0.0.2 5555 replace with device's IP address Disconnect USB and proceed with wireless debugging. adb usb to switch back..
Wifi Connect-Disconnect Listener http://stackoverflow.com/questions/6362314/wifi-connect-disconnect-listener Connect Disconnect Listener Which listener does my class have to implement inorder..
Send data from android to server via JSON http://stackoverflow.com/questions/6523761/send-data-from-android-to-server-via-json userID date time timeStamp accelX accelY accelZ Disconnect from database. server disconnectDB This is an example I used..
Android: Taking complete control of phone(kiosk mode), is it possible? How? http://stackoverflow.com/questions/7121508/android-taking-complete-control-of-phonekiosk-mode-is-it-possible-how switch state case TelephonyManager.CALL_STATE_RINGING Disconnect the call here... break case TelephonyManager.CALL_STATE_OFFHOOK..
Implementing OBEX PUSH Server on Android 2.3 http://stackoverflow.com/questions/7662682/implementing-obex-push-server-on-android-2-3 the packet and return an acknowledgement packet write OBEXDisconnect.parsePacket buffer break case OBEXConstant.GET case OBEXConstant.GET_FINAL.. Log.w Constant.TAG TAG ABORT Request Received isDisconnected true break default break catch final IOException e ... snip.. final byte DISCONNECT 0x01 FINAL_BIT high bit always set Disconnect signal the end of the session public static final byte PUT 0x02..
How can I change the device name? (adb devices) http://stackoverflow.com/questions/9786928/how-can-i-change-the-device-name-adb-devices the current network name setprop net.hostname newhostname Disconnect then reconnect from the network to refresh. I was on a Samsung..
MediaPlayer error (1, -1004) aka MEDIA_ERROR_IO trying to stream music on Samsung S3 http://stackoverflow.com/questions/16672568/mediaplayer-error-1-1004-aka-media-error-io-trying-to-stream-music-on-samsun V MediaPlayer JNI 3921 release 05 21 16 26 57.930 V MediaPlayer 3921 setListener 05 21 16 26 57.930 V MediaPlayer 3921 disconnect 05 21 16 26 57.935 V MediaPlayer 3921 destructor 05 21 16 26 57.935 V MediaPlayer 3921 disconnect android streaming android.. V MediaPlayer 3921 disconnect 05 21 16 26 57.935 V MediaPlayer 3921 destructor 05 21 16 26 57.935 V MediaPlayer 3921 disconnect android streaming android mediaplayer samsung mobile share improve this question The answer to this question turned..
Getting the battery current values for the Android Phone http://stackoverflow.com/questions/2439619/getting-the-battery-current-values-for-the-android-phone class power_supply battery batt_current 449 But that too works only if the phone is connected via USB interface. If I disconnect the phone I see the value of batt_current as '0'. I am not sure why the value of current reported is zero. It should be..
How to prevent Android bluetooth RFCOMM connection from dying immediately after .connect()? http://stackoverflow.com/questions/2660968/how-to-prevent-android-bluetooth-rfcomm-connection-from-dying-immediately-after below one that actually tries to read from input stream and second one that just sits there waiting for the device to disconnect after 5 seconds. And yes I do have third version which first waits for ACL_CONNECTED and then opens socket but there's nothing.. 4121 hci0 dev_00_1C_4D_02_A6_55 Test application No. 2 This test connects and waits useful for displaying the auto disconnect issue. Code public class ZeeTest extends Activity @Override public void onCreate Bundle savedInstanceState super.onCreate..
Disconnect a bluetooth socket in Android http://stackoverflow.com/questions/3031796/disconnect-a-bluetooth-socket-in-android the sensor is still connected to my phone although I have close the connection . Are there any way to make a Bluetooth disconnection I think there is an intent called ACTION_ACL_CONNECTED which does that. Can anyone explain me how to use this Thanks.. in.close out.close socket.close catch IOException e e.printStackTrace android bluetooth disconnection share improve this question Please remember to close your Input output streams first then close the socket. By closing.. remember to close your Input output streams first then close the socket. By closing the streams you kick off the disconnect process. After you close the socket the connection should be fully broken down. If you close the socket before the streams..
how to resume an interrupted download http://stackoverflow.com/questions/3411480/how-to-resume-an-interrupted-download download I'm trying to download a large file from my Yahoo web site server which apparently is setup not by me to disconnect downloads if they are not completed within 100 seconds. The file is small enough to usually successfully transfer. On the.. is small enough to usually successfully transfer. On the occasions when the data rate is slow and the download gets disconnected is there a way to resume the URLConnection at the file offset where the disconnection occurred Here's the code Setup connection... is slow and the download gets disconnected is there a way to resume the URLConnection at the file offset where the disconnection occurred Here's the code Setup connection. URL url new URL strUrl 0 URLConnection cx url.openConnection cx.connect Setup..
How to programmatically tell if a Bluetooth device is connected? (Android 2.2) http://stackoverflow.com/questions/4715865/how-to-programmatically-tell-if-a-bluetooth-device-is-connected-android-2-2 ... Done searching else if BluetoothAdapter.ACTION_ACL_DISCONNECT_REQUESTED.equals action ... Device is about to disconnect else if BluetoothAdapter.ACTION_ACL_DISCONNECTED.equals action ... Device has disconnected A few notes There is no way.. ... Device is about to disconnect else if BluetoothAdapter.ACTION_ACL_DISCONNECTED.equals action ... Device has disconnected A few notes There is no way to retrieve a list of connected devices at application startup. The Bluetooth API does not..
Force scan files after taking photo http://stackoverflow.com/questions/5107823/force-scan-files-after-taking-photo but there is no my last photo thumbnail. It works perfectly on android 2.1. If I connect device via USB to PC and then disconnect file will appear after finished scanning. So how should I start that indexing I tried mScanner new MediaScannerConnection..
Example: Android bi-directional network socket using AsyncTask http://stackoverflow.com/questions/5135438/example-android-bi-directional-network-socket-using-asynctask to the server. Any response from the server will be displayed in the TextView. In the case of http a web server will disconnect from the client once all the data has been sent. For other TCP data streams the connection will stay up until one side disconnects... from the client once all the data has been sent. For other TCP data streams the connection will stay up until one side disconnects. Screenshot AndroidManifest.xml xml version 1.0 encoding utf 8 manifest xmlns android http schemas.android.com apk res..
http://stackoverflow.com/questions/5489671/ksoap-never-timeout timeout. I'm using Apache 2.2.16 to handle my requests. Everything works fine but when I shutdown my Apache or disconnect remote PC on which Apache is running the call never times out. I'm using separate thread to call my WS and this thread stop..
ADB, Wifi and Eclipse: how I can configure? http://stackoverflow.com/questions/6069212/adb-wifi-and-eclipse-how-i-can-configure
Wifi Connect-Disconnect Listener http://stackoverflow.com/questions/6362314/wifi-connect-disconnect-listener Listener Which listener does my class have to implement inorder to automatically check code if the wifi connects disconnects I'm able to manually check for wifi connection disconnection but each time i need to connect disconnect WIFI from android.. inorder to automatically check code if the wifi connects disconnects I'm able to manually check for wifi connection disconnection but each time i need to connect disconnect WIFI from android settings and then run my program for the result. Please.. wifi connects disconnects I'm able to manually check for wifi connection disconnection but each time i need to connect disconnect WIFI from android settings and then run my program for the result. Please help. Thanx in advance. My current code is as..
Send data from android to server via JSON http://stackoverflow.com/questions/6523761/send-data-from-android-to-server-via-json retrieved data to database 'Data'. 4 Close database connection. require_once '.. Connection.php' connect to a database disconnect handler. require_once '.. SendAPI.php' deals with sending querys. server new Connection send new Send Connect to database... database. send sendAccelerationData userID date time timeStamp accelX accelY accelZ Disconnect from database. server disconnectDB This is an example I used recently. Just to note in the php file. I import Connection.php this just deals with the connection..
How does setMicrophoneMute() work? http://stackoverflow.com/questions/6874881/how-does-setmicrophonemute-work great but I still don't understand How is that flag SET_MIC_MUTE in database being used When does this flag actually disconnect the microphone signal from the pre amplifier circuit inside the phone If it doesn't do that who does that If nothing does.. flag is passed on through several layers of code until it ends up in the hardware specific mute microphone. The mic is disconnected when the hardware specific code has run except when in a call at least on some devices. When setMicrophoneMute does not..
Android 3.1 USB-Host - BroadcastReceiver does not receive USB_DEVICE_ATTACHED http://stackoverflow.com/questions/6981736/android-3-1-usb-host-broadcastreceiver-does-not-receive-usb-device-attached is to just check to see if USB is connected every time you get an onResume. You can also set a flag when USB is disconnected because of course the USB disconnect intent fires just fine. So in total your broadcast receiver might look like this.. connected every time you get an onResume. You can also set a flag when USB is disconnected because of course the USB disconnect intent fires just fine. So in total your broadcast receiver might look like this BroadcastReceiver when remove the device..
Android: Taking complete control of phone(kiosk mode), is it possible? How? http://stackoverflow.com/questions/7121508/android-taking-complete-control-of-phonekiosk-mode-is-it-possible-how and add these permissions to your manifest file uses permission android name android.permission.READ_PHONE_STATE and disconnect the call programmatically try TelephonyManager manager TelephonyManager context.getSystemService Context.TELEPHONY_SERVICE.. telephony ITelephony m.invoke manager telephony.endCall catch Exception e Log.d e.getMessage Note Add this file to disconnect the call http dl.dropbox.com u 31740476 ITelephony.aidl To disable keys you need to override @Override public boolean dispatchKeyEvent..
How can i put my buttons like that? http://stackoverflow.com/questions/15235194/how-can-i-put-my-buttons-like-that new Button this btnConnect.setText Connect btnConnect.setLayoutParams param layout2.addView btnConnect Button btnDisconnect new Button this btnDisconnect.setText Disconnect layout2.addView btnDisconnect btnDisconnect.setLayoutParams param layout.addView.. Connect btnConnect.setLayoutParams param layout2.addView btnConnect Button btnDisconnect new Button this btnDisconnect.setText Disconnect layout2.addView btnDisconnect btnDisconnect.setLayoutParams param layout.addView layout2 TableLayout.. btnConnect.setLayoutParams param layout2.addView btnConnect Button btnDisconnect new Button this btnDisconnect.setText Disconnect layout2.addView btnDisconnect btnDisconnect.setLayoutParams param layout.addView layout2 TableLayout tblLayout new TableLayout..
Disconnect a bluetooth socket in Android http://stackoverflow.com/questions/3031796/disconnect-a-bluetooth-socket-in-android a bluetooth socket in Android I'm developing a program in which from an Android Phone I have to connect as a client to..
Problems connecting with bluetooth Android http://stackoverflow.com/questions/4444235/problems-connecting-with-bluetooth-android
Android - Run/install/debug applications over WiFi? http://stackoverflow.com/questions/4893953/android-run-install-debug-applications-over-wifi via USB and make sure debugging is working. adb tcpip 5555 adb connect 10.0.0.2 5555 replace with device's IP address Disconnect USB and proceed with wireless debugging. adb usb to switch back when done. No root required @Sergei suggested that line..
Wifi Connect-Disconnect Listener http://stackoverflow.com/questions/6362314/wifi-connect-disconnect-listener Connect Disconnect Listener Which listener does my class have to implement inorder to automatically check code if the wifi connects disconnects..
Send data from android to server via JSON http://stackoverflow.com/questions/6523761/send-data-from-android-to-server-via-json method to query and add to database. send sendAccelerationData userID date time timeStamp accelX accelY accelZ Disconnect from database. server disconnectDB This is an example I used recently. Just to note in the php file. I import Connection.php..
Android: Taking complete control of phone(kiosk mode), is it possible? How? http://stackoverflow.com/questions/7121508/android-taking-complete-control-of-phonekiosk-mode-is-it-possible-how incomingNumber super.onCallStateChanged state incomingNumber switch state case TelephonyManager.CALL_STATE_RINGING Disconnect the call here... break case TelephonyManager.CALL_STATE_OFFHOOK break case TelephonyManager.CALL_STATE_IDLE break ..
Implementing OBEX PUSH Server on Android 2.3 http://stackoverflow.com/questions/7662682/implementing-obex-push-server-on-android-2-3 packetLength break case OBEXConstant.DISCONNECT Parse the packet and return an acknowledgement packet write OBEXDisconnect.parsePacket buffer break case OBEXConstant.GET case OBEXConstant.GET_FINAL case OBEXConstant.SETPATH case OBEXConstant.SETPATH_FINAL.. Did not implement these break case OBEXConstant.ABORT Log.w Constant.TAG TAG ABORT Request Received isDisconnected true break default break catch final IOException e ... snip ... Snip of OBEXConstant public static final byte FINAL_BIT.. choose your partner negotiate capabilities public static final byte DISCONNECT 0x01 FINAL_BIT high bit always set Disconnect signal the end of the session public static final byte PUT 0x02 0x82 Put send an object public static final byte PUT_FINAL..
How can I change the device name? (adb devices) http://stackoverflow.com/questions/9786928/how-can-i-change-the-device-name-adb-devices superuser access getprop net.hostname this should display the current network name setprop net.hostname newhostname Disconnect then reconnect from the network to refresh. I was on a Samsung Galaxy Note on ICS. Worked like a charm... share improve..
|