¡@

Home 

2014/10/16 ¤W¤È 08:16:27

android Programming Glossary: introduces

Moving and vanishing lines of code; trouble with Eclipse's XML Editor

http://stackoverflow.com/questions/10030727/moving-and-vanishing-lines-of-code-trouble-with-eclipses-xml-editor

to the fix 1 First ADT was fixed such that it no longer introduces these r r sequences into the document. This makes sure that..

uploading video upto 50MB to the server

http://stackoverflow.com/questions/10276647/uploading-video-upto-50mb-to-the-server

any other method. Note changing that to while bytesRead 0 introduces a subtle difference. It will stop reading if you read 0 bytes..

ObjectAnimator in API Level < 11

http://stackoverflow.com/questions/11628623/objectanimator-in-api-level-11

from the same maker of the ActionBarSherlock project it introduces a support ObjectAnimator that works from API 1 onwards. share..

One Activity and all other Fragments [closed]

http://stackoverflow.com/questions/12154505/one-activity-and-all-other-fragments

that section. That said having a single Activity also introduces a lot of complexities. Let's say you have an edit form and for..

android CountDownTimer - additional milliseconds delay between ticks

http://stackoverflow.com/questions/12762272/android-countdowntimer-additional-milliseconds-delay-between-ticks

is calculated from the time the previous onTick ran which introduces a tiny error on every tick. I changed the CountDownTimer source..

How to convert pcm samples in byte array as floating point numbers in the range -1.0 to 1.0 and back?

http://stackoverflow.com/questions/15087668/how-to-convert-pcm-samples-in-byte-array-as-floating-point-numbers-in-the-range

values greater than 32767. You might complain that this introduces some distortion for f 1. This issue is hotly debated. For some.. absolutely pristine keep in mind that this conversion introduces distortion. Why Because the error between the input and output..

Android Borderless Dialog

http://stackoverflow.com/questions/1883425/android-borderless-dialog

is used repeatedly and creating a new Activity every time introduces a significant amount of lag. The answer from here mentions that..

Two questions about max heap sizes and available memory in android

http://stackoverflow.com/questions/4351678/two-questions-about-max-heap-sizes-and-available-memory-in-android

see e.g. the notes on Android 2.3 Gingerbread which introduces a concurrent GC so hopefully these issues will be addressed..

knowing when map has stopped scrolling (like “moveend” in javascript API)

http://stackoverflow.com/questions/4351748/knowing-when-map-has-stopped-scrolling-like-moveend-in-javascript-api

is the last one in the sequence. The downside is that it introduces a slight delay between the map movement happening and the server..

Invoke native date picker from web-app on iOS/Android

http://stackoverflow.com/questions/4946919/invoke-native-date-picker-from-web-app-on-ios-android

iOS 4 and does not affect other devices I tested. But it introduces some quick flashing of the keyboard on iOS and things can be..

Android, javamail and proguard

http://stackoverflow.com/questions/5434699/android-javamail-and-proguard

in the javamail package. Update for SDK 17 Android SDK 17 introduces some changes in the way that jars are loaded. If you have a..

Difference between /res and /assets directories

http://stackoverflow.com/questions/5583608/difference-between-res-and-assets-directories

an index into the the list. This is kind of awkward and introduces opportunities for error if the set of resources changes in the..

Android : App support for multiple tablet screen resolutions

http://stackoverflow.com/questions/5633792/android-app-support-for-multiple-tablet-screen-resolutions

drawable folders. For tablets xhdpi and xlarge has been introduces. But still my question is how to make the design reliably compatible..

Android contacts Display Name and Phone Number(s) in single database query?

http://stackoverflow.com/questions/6587674/android-contacts-display-name-and-phone-numbers-in-single-database-query

with several queries to the phone's database but this introduces considerable overhead. Here is the query I've been working on..

How to detect a tablet device in Android?

http://stackoverflow.com/questions/7511330/how-to-detect-a-tablet-device-in-android

use total pixel threshold suggests it. IFAIK Android 3.0 introduces real tablet support all previous versions are intended for phones..

Moving and vanishing lines of code; trouble with Eclipse's XML Editor

http://stackoverflow.com/questions/10030727/moving-and-vanishing-lines-of-code-trouble-with-eclipses-xml-editor

bugs show_bug.cgi id 375421 . There are two parts to the fix 1 First ADT was fixed such that it no longer introduces these r r sequences into the document. This makes sure that you don't get new documents which triggers the weird editing..

uploading video upto 50MB to the server

http://stackoverflow.com/questions/10276647/uploading-video-upto-50mb-to-the-server

results if the length of the stream is not known or any other method. Note changing that to while bytesRead 0 introduces a subtle difference. It will stop reading if you read 0 bytes but did not reach the end of the stream. That case is legal..

ObjectAnimator in API Level < 11

http://stackoverflow.com/questions/11628623/objectanimator-in-api-level-11

One Activity and all other Fragments [closed]

http://stackoverflow.com/questions/12154505/one-activity-and-all-other-fragments

navigation list I update a single Fragment container to display that section. That said having a single Activity also introduces a lot of complexities. Let's say you have an edit form and for some of the items the user needs to select or create requires..

android CountDownTimer - additional milliseconds delay between ticks

http://stackoverflow.com/questions/12762272/android-countdowntimer-additional-milliseconds-delay-between-ticks

As you said you also noticed that the next time in onTick is calculated from the time the previous onTick ran which introduces a tiny error on every tick. I changed the CountDownTimer source code to call each onTick at the specified intervals from..

How to convert pcm samples in byte array as floating point numbers in the range -1.0 to 1.0 and back?

http://stackoverflow.com/questions/15087668/how-to-convert-pcm-samples-in-byte-array-as-floating-point-numbers-in-the-range

is necessary to watch out for out of range values especially values greater than 32767. You might complain that this introduces some distortion for f 1. This issue is hotly debated. For some incomplete discussion of this see this blog post . This is.. completeness I must add this if you are trying to keep things absolutely pristine keep in mind that this conversion introduces distortion. Why Because the error between the input and output is correlated with the signal. It turns out that correlation..

Android Borderless Dialog

http://stackoverflow.com/questions/1883425/android-borderless-dialog

the dialog with a transparent background but the dialog is used repeatedly and creating a new Activity every time introduces a significant amount of lag. The answer from here mentions that it can be found in the ApiDemos but i can't seem to find..

Two questions about max heap sizes and available memory in android

http://stackoverflow.com/questions/4351678/two-questions-about-max-heap-sizes-and-available-memory-in-android

or discard everything. The Dalvik heap is under active development see e.g. the notes on Android 2.3 Gingerbread which introduces a concurrent GC so hopefully these issues will be addressed in a future release. Edit Update... The external allocation..

knowing when map has stopped scrolling (like “moveend” in javascript API)

http://stackoverflow.com/questions/4351748/knowing-when-map-has-stopped-scrolling-like-moveend-in-javascript-api

that actually triggers the task to perform the server fetch is the last one in the sequence. The downside is that it introduces a slight delay between the map movement happening and the server fetch occurring. I'm not happy with it it's ugly but it..

Invoke native date picker from web-app on iOS/Android

http://stackoverflow.com/questions/4946919/invoke-native-date-picker-from-web-app-on-ios-android

to remove focus before the date picker is shown helps for iOS 4 and does not affect other devices I tested. But it introduces some quick flashing of the keyboard on iOS and things can be even more confusing on first usage as then the date picker..

Android, javamail and proguard

http://stackoverflow.com/questions/5434699/android-javamail-and-proguard

it by running tar tf commands against each of the jars in the javamail package. Update for SDK 17 Android SDK 17 introduces some changes in the way that jars are loaded. If you have a project that uses external jars upgrading to SDK 17 or beyond..

Difference between /res and /assets directories

http://stackoverflow.com/questions/5583608/difference-between-res-and-assets-directories

a list of all the resource IDs that might be used and compute an index into the the list. This is kind of awkward and introduces opportunities for error if the set of resources changes in the development cycle. EDIT you can retrieve a resource ID by..

Android : App support for multiple tablet screen resolutions

http://stackoverflow.com/questions/5633792/android-app-support-for-multiple-tablet-screen-resolutions

medium large .. screens Android provides specific layout and drawable folders. For tablets xhdpi and xlarge has been introduces. But still my question is how to make the design reliably compatible for all different tablet screen resolutions. Look forward..

Android contacts Display Name and Phone Number(s) in single database query?

http://stackoverflow.com/questions/6587674/android-contacts-display-name-and-phone-numbers-in-single-database-query

or all . There are many methods for obtaining this information with several queries to the phone's database but this introduces considerable overhead. Here is the query I've been working on but it results in Uri uri ContactsContract.Contacts.CONTENT_URI..

How to detect a tablet device in Android?

http://stackoverflow.com/questions/7511330/how-to-detect-a-tablet-device-in-android

settings which would be enabled by default if resolution use total pixel threshold suggests it. IFAIK Android 3.0 introduces real tablet support all previous versions are intended for phones and tablets are just bigger phones got one share improve..