c# Programming Glossary: broadcast

http://stackoverflow.com/questions/10336521/query-local-ip-address

empty. At this point I'm starting to consider doing a UDP broadcast listen loop to hear my own request and extract the address from..

Listening to Port 5060

http://stackoverflow.com/questions/10507166/listening-to-port-5060

access permissions. For example this error occurs when a broadcast address is used for sendto but the broadcast permission is not.. occurs when a broadcast address is used for sendto but the broadcast permission is not set by using setsockopt SO_BROADCAST . Another..

Broadcasting UDP message to all the available network cards

http://stackoverflow.com/questions/1096142/broadcasting-udp-message-to-all-the-available-network-cards

it sounds because if you have more than one interface the broadcasts will not always go out all of the interfaces. To get around.. 1 Then to send the UDP packet via broadcast I use something like the following I am using IPAddress.Broadcast.. you should note if you use a specific ipaddress instead of broadcast the route table will only send it out the interface that matches..

How to calculate the IP range when the IP address and the netmask is given?

http://stackoverflow.com/questions/1470792/how-to-calculate-the-ip-range-when-the-ip-address-and-the-netmask-is-given

the 0's in the subnet mask are 0 and the last address the broadcast address is where all the host bits are 1. For example ip 192.168.33.72.. host bits to 1's then you get the last possible IP aka the broadcast address 11000000.10101000.00100001.01111111 192.168.33.127 So..

A super-simple MVVM-Light WP7 sample?

http://stackoverflow.com/questions/3655422/a-super-simple-mvvm-light-wp7-sample

I liked using ViewModelBase better because it supports broadcast and I think in my actual project that will be handy because.. _myProperty _myProperty value Update bindings and broadcast change using GalaSoft.MvvmLight.Messenging GalaSoft.MvvmLight.Threading.DispatcherHelper.CheckBeginInvokeOnUI..

Send broadcast message from all network adapters

http://stackoverflow.com/questions/436778/send-broadcast-message-from-all-network-adapters

broadcast message from all network adapters I have an application that.. all network adapters I have an application that sends broadcast messages and listens for response packets. Below is the code.. 2000 Callback null When I run the application the broadcast message was not being sent. On my machine I have three network..

How to broadcast a UDP packet on WP7 Mango?

http://stackoverflow.com/questions/6983815/how-to-broadcast-a-udp-packet-on-wp7-mango

to broadcast a UDP packet on WP7 Mango I want to send a UDP packet from.. I want to send a UDP packet from a phone to the limited broadcast address IPAddress.Broadcast 255.255.255.255 . This is what I.. deal with multicast. Is there any way to do this sort of broadcast on Mango c# windows phone 7.5 share improve this question..

UdpClient receive on broadcast address

http://stackoverflow.com/questions/746519/udpclient-receive-on-broadcast-address

receive on broadcast address In c# I am using the UdpClient.Receive function public.. only use IPAddress.Broadcast when you wanted to Send a broadcast UDP packet. Set up the udp client this.broadcastAddress new.. to Send a broadcast UDP packet. Set up the udp client this.broadcastAddress new IPEndPoint IPAddress.Any 1234 this.udpClient new..

Node.Js + Socket.IO vs SignalR vs C# WebSocket Server

http://stackoverflow.com/questions/9537641/node-js-socket-io-vs-signalr-vs-c-sharp-websocket-server