¡@
c++ Programming Glossary: receiverHow to print member function address in C++ http://stackoverflow.com/questions/11111969/how-to-print-member-function-address-in-c function table to find the function to call given the receiver object. In general I think this means that it's impossible to..
C++ socket programming Max size of tcp/ip socket Buffer? http://stackoverflow.com/questions/12931528/c-socket-programming-max-size-of-tcp-ip-socket-buffer this question TCP data is buffered at both sender and receiver. The size of the receiver's socket receive buffer determines.. is buffered at both sender and receiver. The size of the receiver's socket receive buffer determines how much data can be in flight..
http://stackoverflow.com/questions/3438366/setupdigetdeviceproperty 7 33519F3A 0 0002 Device Description Logitech Unifying USB receiver Hardware IDs USB VID_046D PID_C52B REV_1201 MI_02 USB VID_046D..
C++ DGRAM socket get the RECEIVER address http://stackoverflow.com/questions/3940612/c-dgram-socket-get-the-receiver-address socket get the RECEIVER address In C how can I get the receiver address of the UDP packet which I have received using recvfrom... I found that one way of doing this is int r getsockopt receiver_sock SOL_IP SO_ORIGINAL_DST struct sockaddr sender_addr socklen_t.. inclusion of proper header. Please help. c sockets udp receiver share improve this question On Linux you want to use IP_PKTINFO..
http://stackoverflow.com/questions/4334696/command-pattern-purpose done. Also it decouples the sender of the command from the receiver. This can allow multiple things to generate the same command..
http://stackoverflow.com/questions/4571611/making-operator-virtual above is a free function which can't be virtual it has no receiver object . In order to make the function virtual it must be defined..
http://stackoverflow.com/questions/4944621/create-an-on-screen-keyboard on screen keyboard simulates a sequence of keystrokes. The receiver is an old program that performs different tasks depending on..
Why copying stringstream is not allowed? http://stackoverflow.com/questions/6010864/why-copying-stringstream-is-not-allowed side is the source sender on the other side is the sink receiver . That is called unidirectional stream. There're also bidirectional..
What is the correct way of reading from a TCP socket in C/C++? http://stackoverflow.com/questions/666601/what-is-the-correct-way-of-reading-from-a-tcp-socket-in-c-c a few assumptions ints are the same size on the sender and receiver. Endianess is the same on both the sender and receiver. You.. and receiver. Endianess is the same on both the sender and receiver. You have control of the protocol on both sides When you send..
Speeding up file I/O: mmap() vs. read() http://stackoverflow.com/questions/8056984/speeding-up-file-i-o-mmap-vs-read The interesting part is in how you get the data to your receiver. Assuming you're putting this data to a pipe I recommend you..
Qt QCoreApplication::postEvent http://stackoverflow.com/questions/8729508/qt-qcoreapplicationpostevent by g_qtdraw.main.widget so I simply used that one as the receiver argument for postEvent . Now my application has more than one.. the main widget. How do I choose the correct widget as the receiver the one under the mouse x y coords Is there a standard way so.. fine Many thanks to Dusty Campbell QPoint pos x y QWidget receiver QApplication widgetAt pos if receiver QMouseEvent event new..
Is it possible to connect a signal to a static slot without a receiver instance? http://stackoverflow.com/questions/9428038/is-it-possible-to-connect-a-signal-to-a-static-slot-without-a-receiver-instance it possible to connect a signal to a static slot without a receiver instance Is it possible to connect a signal to a static slot.. it possible to connect a signal to a static slot without a receiver instance Like this connect object SIGNAL some STATIC_SLOT staticFooMember.. QObject sender const QMetaMethod signal const QObject receiver const QMetaMethod method Qt ConnectionType type Qt AutoConnection..
http://stackoverflow.com/questions/3438366/setupdigetdeviceproperty USB VID_046D PID_C52B Bus Reported Device Description USB Receiver Device Manufacturer Standard USB Host Controller Device Location.. PID_C52B MI_00 Bus Reported Device Description USB Receiver Device Manufacturer Logitech x64 Device Location Info 0000.001a.0000.001.002.000.000.000.000.. PID_C52B MI_01 Bus Reported Device Description USB Receiver Device Manufacturer Standard system devices Device Location..
Overlapped ReadFileEx on Child Process' Redirected STDOUT Never Fires http://stackoverflow.com/questions/3661106/overlapped-readfileex-on-child-process-redirected-stdout-never-fires . I want to create an MFC dialog based application named Receiver that starts Sender and can read it's output. Receiver should.. Receiver that starts Sender and can read it's output. Receiver should also be able to detect when Sender has died or be able.. handles h_Child_StdIn_Read HANDLE_FLAG_INHERIT 0 ... Receiver then goes on to start Sender via CreateProcess create child..
std::ostream need help with function http://stackoverflow.com/questions/4801196/stdostream-need-help-with-function os const Telegram t os time t.DispatchTime Sender t.Sender Receiver t.Receiver Msg t.Msg return os UPDATE 1 when i use this function.. t os time t.DispatchTime Sender t.Sender Receiver t.Receiver Msg t.Msg return os UPDATE 1 when i use this function it doesnt..
When does Endianness become a factor? http://stackoverflow.com/questions/7179907/when-does-endianness-become-a-factor Sender for n 0 n sizeof uint16 8 n stl_bitset n value n 1 Receiver for n 0 n sizeof uint16 8 n value uint16 stl_bitset n 1 n Is..
|