¡@
2014/10/15 ¤U¤È 10:03:29
iphone Programming Glossary: accountHow to check for an active Internet Connection on iPhone SDK? http://stackoverflow.com/questions/1083701/how-to-check-for-an-active-internet-connection-on-iphone-sdk where you receive a memory warning and the observer never gets unregistered so you should account for that as well. Note The domain you use doesn't matter. It's just testing for a gateway to any domain...
Resizing UIimages pulled from the Camera also ROTATES the UIimage? http://stackoverflow.com/questions/1260249/resizing-uiimages-pulled-from-the-camera-also-rotates-the-uiimage doesn't work is because the imageOrientation on the code that you have is not being taken into account. Specifically if the imageOrientation is right left then you need to both rotate the image and swap..
How to add a UIImage in MailComposer Sheet of MFMailComposeViewController http://stackoverflow.com/questions/1527351/how-to-add-a-uiimage-in-mailcomposer-sheet-of-mfmailcomposeviewcontroller image embedded emails to myself on Yahoo my personal website and my MobileMe. I don't have a Gmail account but the Yahoo worked perfectly and every source I've found says that the bold tags are all you need..
Changing my CALayer's anchorPoint moves the view http://stackoverflow.com/questions/1968017/changing-my-calayers-anchorpoint-moves-the-view the layer. In order to prevent this movement you would need to adjust the layer's position to account for the new anchorPoint. One way I've done this is to grab the layer's bounds multiply the bounds' width.. two anchorPoints and apply that difference to the position of the layer. You might even be able to account for rotation this way by using CGPointApplyAffineTransform with your UIView's CGAffineTransform. share..
Core Data - Storing Images (iPhone) http://stackoverflow.com/questions/2090028/core-data-storing-images-iphone Data Storing Images iPhone I have an application where I allow the user to add an image for their account. I wish to know how to store an image obtained from the camera or photo library using Core Data as I..
What are the sizes used for the iOS application splash screen? http://stackoverflow.com/questions/2634898/what-are-the-sizes-used-for-the-ios-application-splash-screen The screen size of the iPad is 768 1024 notice in the dimensions that follow the height takes into account a 20 pixel status bar. Filename Dimensions Default Portrait.png 768w x 1004h Default PortraitUpsideDown.png..
The simplest way to resize an UIImage? http://stackoverflow.com/questions/2658738/the-simplest-way-to-resize-an-uiimage newSize In next line pass 0.0 to use the current device's pixel scaling factor and thus account for Retina resolution . Pass 1.0 to force exact pixel size. UIGraphicsBeginImageContextWithOptions newSize..
Tab bar controller inside a navigation controller, or sharing a navigation root view http://stackoverflow.com/questions/576764/tab-bar-controller-inside-a-navigation-controller-or-sharing-a-navigation-root seems to be a navigation controller whose root view is an Accounts table view. If you click on any account it goes to the second level which has a tab bar across the bottom. Each tab item shows a different list.. seems to remove it from the first. Not to mention all the book keeping when selecting a different account would probably be a pain. How should I implement this the Right Way ^1 The tab bar controller needs.. onto a nav controller stack but still lives by the view controller philosophy. Each tab on the account specific view Tweets Replies Messages is its own view controller and as far as they are concerned they're..
Locking the Fields in MFMailComposeViewController http://stackoverflow.com/questions/6284599/locking-the-fields-in-mfmailcomposeviewcontroller etc cannot be changed by the user I need the e mail the user sends to go to a particular account and the body to meet certain criteria so if the user drastically edits the format everything could go.. and password that the code is refering to is an smtp server. If you dont have one create a gmail account and use gmail settings. If you are not familiar with gmail settings google gmail smtp you will find..
http://stackoverflow.com/questions/6896029/re-sign-ipa-iphone a couple of IPA files from different people that I would like to re sign with a enterprise account instead of the corporate account for the app store or sometimes ad hoc distributed . My problem is that.. different people that I would like to re sign with a enterprise account instead of the corporate account for the app store or sometimes ad hoc distributed . My problem is that when I try to resign the app.. with no devices added in the provisioning profile. Results in a new IPA signed with a enterprise account and a mobile provisioning profile for in house deployment the mobile provisioning profile gets embedded..
Google plus api for posting on wall like facebook http://stackoverflow.com/questions/7857812/google-plus-api-for-posting-on-wall-like-facebook my problem. ALso there are little information on how to get the user login to there google plus account. I am not sure what to do for the user login do I have to use some GTLObject or use UIWebView like foursquare.. as in foursquare. Just with some small changes. in viewdidload method. NSString authStr @ https accounts.google.com o oauth2 auth client_id client_id redirect_uri http somevalidurl.com scope https www.googleapis.com..
How to check for an active Internet Connection on iPhone SDK? http://stackoverflow.com/questions/1083701/how-to-check-for-an-active-internet-connection-on-iphone-sdk self Note There might be an instance using viewWillDisappear where you receive a memory warning and the observer never gets unregistered so you should account for that as well. Note The domain you use doesn't matter. It's just testing for a gateway to any domain. Important Note The Reachability class is one of the most..
Resizing UIimages pulled from the Camera also ROTATES the UIimage? http://stackoverflow.com/questions/1260249/resizing-uiimages-pulled-from-the-camera-also-rotates-the-uiimage share improve this question The reason your code doesn't work is because the imageOrientation on the code that you have is not being taken into account. Specifically if the imageOrientation is right left then you need to both rotate the image and swap width height. Here is some code to do this UIImage imageByScalingToSize..
How to add a UIImage in MailComposer Sheet of MFMailComposeViewController http://stackoverflow.com/questions/1527351/how-to-add-a-uiimage-in-mailcomposer-sheet-of-mfmailcomposeviewcontroller release I've tested this on the iPhone and sent lovely image embedded emails to myself on Yahoo my personal website and my MobileMe. I don't have a Gmail account but the Yahoo worked perfectly and every source I've found says that the bold tags are all you need to make it work. Hope this helps all share improve this answer..
Changing my CALayer's anchorPoint moves the view http://stackoverflow.com/questions/1968017/changing-my-calayers-anchorpoint-moves-the-view that anchorPoint while maintaining the same position moves the layer. In order to prevent this movement you would need to adjust the layer's position to account for the new anchorPoint. One way I've done this is to grab the layer's bounds multiply the bounds' width and height by the old and new anchorPoint's normalized..
Core Data - Storing Images (iPhone) http://stackoverflow.com/questions/2090028/core-data-storing-images-iphone Data Storing Images iPhone I have an application where I allow the user to add an image for their account. I wish to know how to store an image obtained from the camera or photo library using Core Data as I may offer a backup facility for the user and would be looking..
What are the sizes used for the iOS application splash screen? http://stackoverflow.com/questions/2634898/what-are-the-sizes-used-for-the-ios-application-splash-screen naming convention has been created for iPad launch images. The screen size of the iPad is 768 1024 notice in the dimensions that follow the height takes into account a 20 pixel status bar. Filename Dimensions Default Portrait.png 768w x 1004h Default PortraitUpsideDown.png 768w x 1004h Default Landscape.png 1024w x 748h Default..
The simplest way to resize an UIImage? http://stackoverflow.com/questions/2658738/the-simplest-way-to-resize-an-uiimage UIImage image scaledToSize CGSize newSize UIGraphicsBeginImageContext newSize In next line pass 0.0 to use the current device's pixel scaling factor and thus account for Retina resolution . Pass 1.0 to force exact pixel size. UIGraphicsBeginImageContextWithOptions newSize NO 0.0 image drawInRect CGRectMake 0 0 newSize.width..
Tab bar controller inside a navigation controller, or sharing a navigation root view http://stackoverflow.com/questions/576764/tab-bar-controller-inside-a-navigation-controller-or-sharing-a-navigation-root app which behaves as so the top level view controller seems to be a navigation controller whose root view is an Accounts table view. If you click on any account it goes to the second level which has a tab bar across the bottom. Each tab item shows a different list and lets you drill down further the subsequent levels don't.. work pushing the table controller to a second nav controller seems to remove it from the first. Not to mention all the book keeping when selecting a different account would probably be a pain. How should I implement this the Right Way ^1 The tab bar controller needs to be subclassed so that the tab bar controller's navigation.. plain subclass of UIViewController that is happy to get pushed onto a nav controller stack but still lives by the view controller philosophy. Each tab on the account specific view Tweets Replies Messages is its own view controller and as far as they are concerned they're getting swapped around on screen by a plain ol UITabBarController..
Locking the Fields in MFMailComposeViewController http://stackoverflow.com/questions/6284599/locking-the-fields-in-mfmailcomposeviewcontroller fields in an MFMailComposeViewController so that the body recipients etc cannot be changed by the user I need the e mail the user sends to go to a particular account and the body to meet certain criteria so if the user drastically edits the format everything could go horribly wrong..At the moment the body is filled in from data.. name loadingLabel in interface builder 4. The username and password that the code is refering to is an smtp server. If you dont have one create a gmail account and use gmail settings. If you are not familiar with gmail settings google gmail smtp you will find what you need. Find Framework Art here For your .h file make..
http://stackoverflow.com/questions/6896029/re-sign-ipa-iphone xcodebuild followed by a xcrun without any problems I've received a couple of IPA files from different people that I would like to re sign with a enterprise account instead of the corporate account for the app store or sometimes ad hoc distributed . My problem is that when I try to resign the app it won't install on my device.. without any problems I've received a couple of IPA files from different people that I would like to re sign with a enterprise account instead of the corporate account for the app store or sometimes ad hoc distributed . My problem is that when I try to resign the app it won't install on my device and it should since it's a Enterprise.. Tested with a IPA signed with cert1 for app store submission with no devices added in the provisioning profile. Results in a new IPA signed with a enterprise account and a mobile provisioning profile for in house deployment the mobile provisioning profile gets embedded to the IPA . Solution Unzip the IPA unzip Application.ipa..
Google plus api for posting on wall like facebook http://stackoverflow.com/questions/7857812/google-plus-api-for-posting-on-wall-like-facebook of mac and iphone but can't find anything that will solve my problem. ALso there are little information on how to get the user login to there google plus account. I am not sure what to do for the user login do I have to use some GTLObject or use UIWebView like foursquare for user login. Does anyone have a little bit of information.. plus. The steps are same as for getting the access token as in foursquare. Just with some small changes. in viewdidload method. NSString authStr @ https accounts.google.com o oauth2 auth client_id client_id redirect_uri http somevalidurl.com scope https www.googleapis.com auth plus.me response_type token as a url for loading..
How to check for an active Internet Connection on iPhone SDK? http://stackoverflow.com/questions/1083701/how-to-check-for-an-active-internet-connection-on-iphone-sdk using viewWillDisappear where you receive a memory warning and the observer never gets unregistered so you should account for that as well. Note The domain you use doesn't matter. It's just testing for a gateway to any domain. Important Note..
Resizing UIimages pulled from the Camera also ROTATES the UIimage? http://stackoverflow.com/questions/1260249/resizing-uiimages-pulled-from-the-camera-also-rotates-the-uiimage The reason your code doesn't work is because the imageOrientation on the code that you have is not being taken into account. Specifically if the imageOrientation is right left then you need to both rotate the image and swap width height. Here is..
How to add a UIImage in MailComposer Sheet of MFMailComposeViewController http://stackoverflow.com/questions/1527351/how-to-add-a-uiimage-in-mailcomposer-sheet-of-mfmailcomposeviewcontroller and sent lovely image embedded emails to myself on Yahoo my personal website and my MobileMe. I don't have a Gmail account but the Yahoo worked perfectly and every source I've found says that the bold tags are all you need to make it work. Hope..
Changing my CALayer's anchorPoint moves the view http://stackoverflow.com/questions/1968017/changing-my-calayers-anchorpoint-moves-the-view the same position moves the layer. In order to prevent this movement you would need to adjust the layer's position to account for the new anchorPoint. One way I've done this is to grab the layer's bounds multiply the bounds' width and height by the.. difference of the two anchorPoints and apply that difference to the position of the layer. You might even be able to account for rotation this way by using CGPointApplyAffineTransform with your UIView's CGAffineTransform. share improve this answer..
Core Data - Storing Images (iPhone) http://stackoverflow.com/questions/2090028/core-data-storing-images-iphone Data Storing Images iPhone I have an application where I allow the user to add an image for their account. I wish to know how to store an image obtained from the camera or photo library using Core Data as I may offer a backup..
What are the sizes used for the iOS application splash screen? http://stackoverflow.com/questions/2634898/what-are-the-sizes-used-for-the-ios-application-splash-screen iPad launch images. The screen size of the iPad is 768 1024 notice in the dimensions that follow the height takes into account a 20 pixel status bar. Filename Dimensions Default Portrait.png 768w x 1004h Default PortraitUpsideDown.png 768w x 1004h..
The simplest way to resize an UIImage? http://stackoverflow.com/questions/2658738/the-simplest-way-to-resize-an-uiimage UIGraphicsBeginImageContext newSize In next line pass 0.0 to use the current device's pixel scaling factor and thus account for Retina resolution . Pass 1.0 to force exact pixel size. UIGraphicsBeginImageContextWithOptions newSize NO 0.0 image..
Tab bar controller inside a navigation controller, or sharing a navigation root view http://stackoverflow.com/questions/576764/tab-bar-controller-inside-a-navigation-controller-or-sharing-a-navigation-root view controller seems to be a navigation controller whose root view is an Accounts table view. If you click on any account it goes to the second level which has a tab bar across the bottom. Each tab item shows a different list and lets you drill.. nav controller seems to remove it from the first. Not to mention all the book keeping when selecting a different account would probably be a pain. How should I implement this the Right Way ^1 The tab bar controller needs to be subclassed so.. is happy to get pushed onto a nav controller stack but still lives by the view controller philosophy. Each tab on the account specific view Tweets Replies Messages is its own view controller and as far as they are concerned they're getting swapped..
How to compare two NSDates: Which is more recent? http://stackoverflow.com/questions/5965044/how-to-compare-two-nsdates-which-is-more-recent is more recent I am trying to achieve a dropBox sync and need to compare the dates of two files. One is on my dropBox account and one is on my iPhone. I came up with the following but I get unexpected results. I guess I'm doing something fundamentally..
Locking the Fields in MFMailComposeViewController http://stackoverflow.com/questions/6284599/locking-the-fields-in-mfmailcomposeviewcontroller so that the body recipients etc cannot be changed by the user I need the e mail the user sends to go to a particular account and the body to meet certain criteria so if the user drastically edits the format everything could go horribly wrong..At.. 4. The username and password that the code is refering to is an smtp server. If you dont have one create a gmail account and use gmail settings. If you are not familiar with gmail settings google gmail smtp you will find what you need. Find..
Transferring ownership of an iPhone app on the app store http://stackoverflow.com/questions/671382/transferring-ownership-of-an-iphone-app-on-the-app-store app to another company in the near future. Does anyone have any experience with moving an app's ownership to another account Specifically when I sell an app to another company... ... how do we move the app to their account what's the mechanism ..... ownership to another account Specifically when I sell an app to another company... ... how do we move the app to their account what's the mechanism ... can my users still get updates released by the new owner without having to re buy re download the.. a colleague managed to get things sorted out and we got our App which was running under my private single Dev account running under a new enterprise account. We kept our ratings our #1 place in our category in the appstore and all in all..
http://stackoverflow.com/questions/6896029/re-sign-ipa-iphone any problems I've received a couple of IPA files from different people that I would like to re sign with a enterprise account instead of the corporate account for the app store or sometimes ad hoc distributed . My problem is that when I try to resign.. of IPA files from different people that I would like to re sign with a enterprise account instead of the corporate account for the app store or sometimes ad hoc distributed . My problem is that when I try to resign the app it won't install on.. app store submission with no devices added in the provisioning profile. Results in a new IPA signed with a enterprise account and a mobile provisioning profile for in house deployment the mobile provisioning profile gets embedded to the IPA . Solution..
Google plus api for posting on wall like facebook http://stackoverflow.com/questions/7857812/google-plus-api-for-posting-on-wall-like-facebook that will solve my problem. ALso there are little information on how to get the user login to there google plus account. I am not sure what to do for the user login do I have to use some GTLObject or use UIWebView like foursquare for user login... the access token as in foursquare. Just with some small changes. in viewdidload method. NSString authStr @ https accounts.google.com o oauth2 auth client_id client_id redirect_uri http somevalidurl.com scope https www.googleapis.com auth plus.me..
Difference between objectForKey and valueForKey? http://stackoverflow.com/questions/1062183/difference-between-objectforkey-and-valueforkey with ANY class. valueForKey allows you to access a property using a string for its name. So for instance if I have an Account class with a property accountNumber I can do the following NSNumber anAccountNumber NSNumber numberWithInt 12345 Account.. its name. So for instance if I have an Account class with a property accountNumber I can do the following NSNumber anAccountNumber NSNumber numberWithInt 12345 Account newAccount Account alloc init newAccount setAccountNumber anAccountNUmber NSNumber.. class with a property accountNumber I can do the following NSNumber anAccountNumber NSNumber numberWithInt 12345 Account newAccount Account alloc init newAccount setAccountNumber anAccountNUmber NSNumber anotherAccountNumber newAccount accountNumber..
How do you get a persons phone number from the address book? http://stackoverflow.com/questions/1117575/how-do-you-get-a-persons-phone-number-from-the-address-book CFRelease contactData The problem is that on the second line when running on a 3.0 device I get the following error Account Manager could not find account with identifier MobileMe rustyshelf followed by Program received signal EXC_BAD_ACCESS ...
Chrome on iOS shows weird url for jQuery Mobile page (ASP.NET MVC) http://stackoverflow.com/questions/11297287/chrome-on-ios-shows-weird-url-for-jquery-mobile-page-asp-net-mvc
http://stackoverflow.com/questions/11889556/authenticating-requests-from-mobile-iphone-app-to-asp-net-web-api-feedback-re against established user accounts. The iPhone will make calls to the web API in the following manner API Method Create Account Client Sends New Account Data Username Password First Name Last Name etc.. Application ID UTC Timestamp Hash of UTC Timestamp.. accounts. The iPhone will make calls to the web API in the following manner API Method Create Account Client Sends New Account Data Username Password First Name Last Name etc.. Application ID UTC Timestamp Hash of UTC Timestamp Application ID salted.. use a salt that is owned only by that user so it can't be used by an attacker to impersonate others. API Method Get Account Used for getting user's hashing salt for accounts that were created on the web site but haven't yet been synced on the iPhone...
i want to store some data in “EverNote” through our app http://stackoverflow.com/questions/14052708/i-want-to-store-some-data-in-evernote-through-our-app not supported by this URL I able to authenticate with the EVERNOTE and i able to get the number of notebooks in that Account. I am using sqllite in my app. i am using one folder for images. Sqllite have the images links info. How to store the data...
How to decrypt an encrypted Apple iTunes iPhone backup? http://stackoverflow.com/questions/1498342/how-to-decrypt-an-encrypted-apple-itunes-iphone-backup you have key835 for device 14b826ee48c5ea8b617f62fe12040c2d09af6b46 enter it in hex Passwords Service Account Data Access group Protection class AirPort Ed ™s Coffee Shop 3FrenchRoast apple AfterFirstUnlock ... An important warning..
Using NSPredicate with Core Data NSFetchedResultsController http://stackoverflow.com/questions/2082206/using-nspredicate-with-core-data-nsfetchedresultscontroller Core Data NSFetchedResultsController I have a fetchedResultsController that has returned all records for my entity Account . I would like to quickly search all Account records for the attribute lastName value and give me back the Account object.. a fetchedResultsController that has returned all records for my entity Account . I would like to quickly search all Account records for the attribute lastName value and give me back the Account object or at least the indexPath of the object in.. Account . I would like to quickly search all Account records for the attribute lastName value and give me back the Account object or at least the indexPath of the object in the fetchedResultsController. There should only be 1 object returned...
How to add a push button to an iPhone settings page? http://stackoverflow.com/questions/2408185/how-to-add-a-push-button-to-an-iphone-settings-page page contains buttons labeled Clear History or Clear Cache . The Mail App's settings page contains a big red Delete Account button. Is there a way to create such a settings page with buttons for my app I checked Apple's documentation and didn't..
Any (early) experiences with auto-renewable subscriptions for iOS http://stackoverflow.com/questions/5017731/any-early-experiences-with-auto-renewable-subscriptions-for-ios each subscription period Price of subscription and price per issue if appropriate Payment will be charged to iTunes Account at confirmation of purchase Subscription automatically renews unless auto renew is turned off at least 24 hours before the.. automatically renews unless auto renew is turned off at least 24 hours before the end of the current period Account will be charged for renewal within 24 hours prior to the end of the current period and identify the cost of the renewal.. cost of the renewal Subscriptions may be managed by the user and auto renewal may be turned off by going to the user ™s Account Settings after purchase No cancellation of the current subscription is allowed during active subscription period Links to..
How to prompt user for text input in Alert view http://stackoverflow.com/questions/7015842/how-to-prompt-user-for-text-input-in-alert-view passwordLabel.shadowOffset CGSizeMake 0 1 passwordLabel.textAlignment UITextAlignmentCenter passwordLabel.text @ Account Name passwordAlert addSubview passwordLabel UIImageView passwordImage UIImageView alloc initWithImage UIImage imageWithContentsOfFile..
iphone: Apple ID does not have permission to access iTunes Connect http://stackoverflow.com/questions/7697327/iphone-apple-id-does-not-have-permission-to-access-itunes-connect send me this response which clears the conflict. Please be advised that you currently have an Enterprise Developer Account. As an Enterprise Developer you do not have access to iTunes Connect because the Enterprise Program is for internal app..
Create new app from Business account [duplicate] http://stackoverflow.com/questions/8434865/create-new-app-from-business-account new app from Business account duplicate Possible Duplicate Creating and managing a Facebook app from a Business Account I'm building an iOS app with Facebook integration. I need to create an app at https developers.facebook.com apps . But my..
|