2014/10/15 下午 10:05:06
iphone Programming Glossary: choosegcc-4.2 failed with exit code 1 iphone http://stackoverflow.com/questions/1248520/gcc-4-2-failed-with-exit-code-1-iphone problems . Luckily I have found the Meta Solution In xcode right click the error line and choose Open These Latest Results as Transcript Text File . This will open the real xcode output log which should..
UIScrollView. Any thoughts on implementing “infinite” scroll/zoom? http://stackoverflow.com/questions/1493950/uiscrollview-any-thoughts-on-implementing-infinite-scroll-zoom
iphone webkit css animations cause flicker http://stackoverflow.com/questions/2946748/iphone-webkit-css-animations-cause-flicker 'none' ' webkit transition' 'all 0.2s ease out' ' webkit transform' 'translate XXpx XXpx ' I choose either the first or second transition based on whether or not I want it to animate and the transform..
Install xCode 3.2.3 w/ iPhone SDK 4, get “Base SDK missing”, can't see other SDKs http://stackoverflow.com/questions/3161385/install-xcode-3-2-3-w-iphone-sdk-4-get-base-sdk-missing-cant-see-other-sdk your project From the menu select Project Edit Project Settings... Under Architecture Base SDK choose one of the available device options iPhone 3.2 or iPhone 4.0. If you are iPhone only 4.0 is the way.. window. From the menu select Project Edit Active Target YourTarget Under Architecture Base SDK choose one of the available device or simulator options iPhone 3.2 or iPhone 4.0. If you want to target previous..
Difference between [UIImage imageNamed…] and [UIImage imageWithData…]? http://stackoverflow.com/questions/316236/difference-between-uiimage-imagenamed-and-uiimage-imagewithdata
“Warning: iPhone apps should include an armv6 architecture” even with build config set http://stackoverflow.com/questions/4198676/warning-iphone-apps-should-include-an-armv6-architecture-even-with-build-conf tab in the right column Click the 'Release' or 'Distribution' row under 'Architectures' and choose 'Other...' Double click the highlighted row named ' ARCHS_STANDARD_32_BIT ' in the popover that appears..
How to distribute ios application wirelessly without managing UDIDs and recompilation http://stackoverflow.com/questions/5546581/how-to-distribute-ios-application-wirelessly-without-managing-udids-and-recompil archive then with your newly built entry click on Share Select iOS App Store Package .ipa and choose the proper distribution profile you want to use. Click next then choose a location to save the .ipa.. App Store Package .ipa and choose the proper distribution profile you want to use. Click next then choose a location to save the .ipa file to. Before you click Save you need to check Save for Enterprise Distribution..
How to change UIPickerView height http://stackoverflow.com/questions/573979/how-to-change-uipickerview-height
Example or explanation of Core Data Migration with multiple passes? http://stackoverflow.com/questions/5995231/example-or-explanation-of-core-data-migration-with-multiple-passes This results in twice the values each as a different type in a separate entitiy. To migrate we choose migration by hand and this we do with mapping models. This is also the first part of the answer to your..
http://stackoverflow.com/questions/6769345/xcode-4-valid-signing-identity-not-found-error-on-provisioning-profiles-on-a a heading called TEAMS. Choose Export near the bottom left side of the window. Xcode asks you to choose a file name and password. On your new machine launch Xcode and import the profile you exported above... the profile you exported above. Works like a charm. Edit for Xcode 4.4 With Xcode 4.4 at step 3 choose Provisioning Profiles under LIBRARY. Then select your provisioning profiles either with the mouse or..
performSelector may cause a leak because its selector is unknown http://stackoverflow.com/questions/7017281/performselector-may-cause-a-leak-because-its-selector-is-unknown happen. Usually you'll just get a warning that it doesn't know which of two method signatures to choose from. 3 See the ARC reference on retained return values and unretained return values for more details...
How do I draw a line on the iPhone? http://stackoverflow.com/questions/856354/how-do-i-draw-a-line-on-the-iphone hit Cmd 4 to bring up the Identity Inspector and under Class Identity click the dropdown and choose MyView. Next you need to implement the drawRect method in MyView.m here's some example code that draws..
gcc-4.2 failed with exit code 1 iphone http://stackoverflow.com/questions/1248520/gcc-4-2-failed-with-exit-code-1-iphone the many different responses this error is caused by many different problems . Luckily I have found the Meta Solution In xcode right click the error line and choose Open These Latest Results as Transcript Text File . This will open the real xcode output log which should contain a better description of the error then was previously..
UIScrollView. Any thoughts on implementing “infinite” scroll/zoom? http://stackoverflow.com/questions/1493950/uiscrollview-any-thoughts-on-implementing-infinite-scroll-zoom
iphone webkit css animations cause flicker http://stackoverflow.com/questions/2946748/iphone-webkit-css-animations-cause-flicker The only webkit animations I'm using are ' webkit transition' 'none' ' webkit transition' 'all 0.2s ease out' ' webkit transform' 'translate XXpx XXpx ' I choose either the first or second transition based on whether or not I want it to animate and the transform is the only way I move things around. The biggest issue though..
Install xCode 3.2.3 w/ iPhone SDK 4, get “Base SDK missing”, can't see other SDKs http://stackoverflow.com/questions/3161385/install-xcode-3-2-3-w-iphone-sdk-4-get-base-sdk-missing-cant-see-other-sdk recommendation to check it out. Fixing Base SDK Missing Load your project From the menu select Project Edit Project Settings... Under Architecture Base SDK choose one of the available device options iPhone 3.2 or iPhone 4.0. If you are iPhone only 4.0 is the way to go. Close that window. From the menu select Project Edit.. 4.0. If you are iPhone only 4.0 is the way to go. Close that window. From the menu select Project Edit Active Target YourTarget Under Architecture Base SDK choose one of the available device or simulator options iPhone 3.2 or iPhone 4.0. If you want to target previous iOS versions then in that same window under Deployment..
Difference between [UIImage imageNamed…] and [UIImage imageWithData…]? http://stackoverflow.com/questions/316236/difference-between-uiimage-imagenamed-and-uiimage-imagewithdata
“Warning: iPhone apps should include an armv6 architecture” even with build config set http://stackoverflow.com/questions/4198676/warning-iphone-apps-should-include-an-armv6-architecture-even-with-build-conf the left column followed by the Target Click the 'Build Settings' tab in the right column Click the 'Release' or 'Distribution' row under 'Architectures' and choose 'Other...' Double click the highlighted row named ' ARCHS_STANDARD_32_BIT ' in the popover that appears and replace it by typing 'armv6'. Then add a new row with..
How to distribute ios application wirelessly without managing UDIDs and recompilation http://stackoverflow.com/questions/5546581/how-to-distribute-ios-application-wirelessly-without-managing-udids-and-recompil set up with the correct Code signing profiles. Now go to Product archive then with your newly built entry click on Share Select iOS App Store Package .ipa and choose the proper distribution profile you want to use. Click next then choose a location to save the .ipa file to. Before you click Save you need to check Save for Enterprise.. then with your newly built entry click on Share Select iOS App Store Package .ipa and choose the proper distribution profile you want to use. Click next then choose a location to save the .ipa file to. Before you click Save you need to check Save for Enterprise Distribution The .ipa file needs to be saved on an FTP Server or..
How to change UIPickerView height http://stackoverflow.com/questions/573979/how-to-change-uipickerview-height
Example or explanation of Core Data Migration with multiple passes? http://stackoverflow.com/questions/5995231/example-or-explanation-of-core-data-migration-with-multiple-passes two new entities and convert the values along the migration. This results in twice the values each as a different type in a separate entitiy. To migrate we choose migration by hand and this we do with mapping models. This is also the first part of the answer to your question. We will do the migration in two steps because..
http://stackoverflow.com/questions/6769345/xcode-4-valid-signing-identity-not-found-error-on-provisioning-profiles-on-a under LIBRARY which may be under the heading library or under a heading called TEAMS. Choose Export near the bottom left side of the window. Xcode asks you to choose a file name and password. On your new machine launch Xcode and import the profile you exported above. Works like a charm. Edit for Xcode 4.4 With Xcode 4.4 at step.. name and password. On your new machine launch Xcode and import the profile you exported above. Works like a charm. Edit for Xcode 4.4 With Xcode 4.4 at step 3 choose Provisioning Profiles under LIBRARY. Then select your provisioning profiles either with the mouse or Command A. Also Apple is making improvements in the way they..
performSelector may cause a leak because its selector is unknown http://stackoverflow.com/questions/7017281/performselector-may-cause-a-leak-because-its-selector-is-unknown
How do I draw a line on the iPhone? http://stackoverflow.com/questions/856354/how-do-i-draw-a-line-on-the-iphone position it so you can see all of it. With your new View selected hit Cmd 4 to bring up the Identity Inspector and under Class Identity click the dropdown and choose MyView. Next you need to implement the drawRect method in MyView.m here's some example code that draws a line void drawRect CGRect rect CGContextRef c UIGraphicsGetCurrentContext..
What do I have to do to get Core Data to automatically migrate models? http://stackoverflow.com/questions/1018155/what-do-i-have-to-do-to-get-core-data-to-automatically-migrate-models need to do a little trick in xCode Select your xcdatamodel file Select the Design Menu at the top then Data Model then choose Add Model Version Your xcdatamodel file will then get moved into a new directory with the same name as your xcdatamodel..
iPhone speech recognition API? [duplicate] http://stackoverflow.com/questions/1121548/iphone-speech-recognition-api I was looking through the iPhone SDK but I cannot find any references to this capability. All of the search keywords I choose seem to only find the new voice chat functionality. Does anyone know whether Apple has added voice command APIs to the SDK..
gcc-4.2 failed with exit code 1 iphone http://stackoverflow.com/questions/1248520/gcc-4-2-failed-with-exit-code-1-iphone is caused by many different problems . Luckily I have found the Meta Solution In xcode right click the error line and choose Open These Latest Results as Transcript Text File . This will open the real xcode output log which should contain a better..
UIScrollView. Any thoughts on implementing “infinite” scroll/zoom? http://stackoverflow.com/questions/1493950/uiscrollview-any-thoughts-on-implementing-infinite-scroll-zoom
iPhone UITableView - Delete Button http://stackoverflow.com/questions/2104403/iphone-uitableview-delete-button images for the text. Since we will round the corners at the top and bottom of sections we need to conditionally choose the images based on the row index and the number of rows in the section. UIImage rowBackground UIImage selectionBackground..
iphone webkit css animations cause flicker http://stackoverflow.com/questions/2946748/iphone-webkit-css-animations-cause-flicker are ' webkit transition' 'none' ' webkit transition' 'all 0.2s ease out' ' webkit transform' 'translate XXpx XXpx ' I choose either the first or second transition based on whether or not I want it to animate and the transform is the only way I move..
Install xCode 3.2.3 w/ iPhone SDK 4, get “Base SDK missing”, can't see other SDKs http://stackoverflow.com/questions/3161385/install-xcode-3-2-3-w-iphone-sdk-4-get-base-sdk-missing-cant-see-other-sdk Base SDK Missing Load your project From the menu select Project Edit Project Settings... Under Architecture Base SDK choose one of the available device options iPhone 3.2 or iPhone 4.0. If you are iPhone only 4.0 is the way to go. Close that window... way to go. Close that window. From the menu select Project Edit Active Target YourTarget Under Architecture Base SDK choose one of the available device or simulator options iPhone 3.2 or iPhone 4.0. If you want to target previous iOS versions then..
Difference between [UIImage imageNamed…] and [UIImage imageWithData…]? http://stackoverflow.com/questions/316236/difference-between-uiimage-imagenamed-and-uiimage-imagewithdata
“Warning: iPhone apps should include an armv6 architecture” even with build config set http://stackoverflow.com/questions/4198676/warning-iphone-apps-should-include-an-armv6-architecture-even-with-build-conf Click the 'Build Settings' tab in the right column Click the 'Release' or 'Distribution' row under 'Architectures' and choose 'Other...' Double click the highlighted row named ' ARCHS_STANDARD_32_BIT ' in the popover that appears and replace it by..
What are the Dangers of Method Swizzling in Objective C? http://stackoverflow.com/questions/5339276/what-are-the-dangers-of-method-swizzling-in-objective-c that's pretty controversial and for good reason &mdash they're really hard to implement properly. Many people still choose to use singletons though. The same can be said about swizzling. You should form your own opinion once you fully understand..
How to distribute ios application wirelessly without managing UDIDs and recompilation http://stackoverflow.com/questions/5546581/how-to-distribute-ios-application-wirelessly-without-managing-udids-and-recompil Now go to Product archive then with your newly built entry click on Share Select iOS App Store Package .ipa and choose the proper distribution profile you want to use. Click next then choose a location to save the .ipa file to. Before you.. on Share Select iOS App Store Package .ipa and choose the proper distribution profile you want to use. Click next then choose a location to save the .ipa file to. Before you click Save you need to check Save for Enterprise Distribution The .ipa file..
How to change UIPickerView height http://stackoverflow.com/questions/573979/how-to-change-uipickerview-height
Example or explanation of Core Data Migration with multiple passes? http://stackoverflow.com/questions/5995231/example-or-explanation-of-core-data-migration-with-multiple-passes along the migration. This results in twice the values each as a different type in a separate entitiy. To migrate we choose migration by hand and this we do with mapping models. This is also the first part of the answer to your question. We will..
Why am I having to manually set my view's frame in viewDidLoad? http://stackoverflow.com/questions/6757018/why-am-i-having-to-manually-set-my-views-frame-in-viewdidload Since you construct the view yourself in this method you can initialize its frame to whatever you'd like. The size you choose doesn't matter much since UIKit is likely to change it on you anyway. Just make sure you set your autoresizingMasks appropriately...
http://stackoverflow.com/questions/6769345/xcode-4-valid-signing-identity-not-found-error-on-provisioning-profiles-on-a library or under a heading called TEAMS. Choose Export near the bottom left side of the window. Xcode asks you to choose a file name and password. On your new machine launch Xcode and import the profile you exported above. Works like a charm... Xcode and import the profile you exported above. Works like a charm. Edit for Xcode 4.4 With Xcode 4.4 at step 3 choose Provisioning Profiles under LIBRARY. Then select your provisioning profiles either with the mouse or Command A. Also Apple..
performSelector may cause a leak because its selector is unknown http://stackoverflow.com/questions/7017281/performselector-may-cause-a-leak-because-its-selector-is-unknown very rare but could happen. Usually you'll just get a warning that it doesn't know which of two method signatures to choose from. 3 See the ARC reference on retained return values and unretained return values for more details. share improve this..
How do I draw a line on the iPhone? http://stackoverflow.com/questions/856354/how-do-i-draw-a-line-on-the-iphone your new View selected hit Cmd 4 to bring up the Identity Inspector and under Class Identity click the dropdown and choose MyView. Next you need to implement the drawRect method in MyView.m here's some example code that draws a line void drawRect..
http://stackoverflow.com/questions/12540534/xcode-4-5-4g182-iphone-5-ios6-choose-a-destination-with-a-supported-archit 4.5 4G182 iPhone 5 iOS6 Choose a destination with a supported architecture in order to run on this device So I have a brand new app I created last night.. with the new device UUID I tried to run my app on it and got this error XCode cannot run using the selected device. Choose a destination with a supported architecture in order to run on this device. I've enabled the device for development. Both..
AdMob crashes with [GADObjectPrivate changeState:]: unrecognized selector http://stackoverflow.com/questions/12635283/admob-crashes-with-gadobjectprivate-changestate-unrecognized-selector to the Other Linker Flags of your application target's build setting Click the blue top level project icon in XCode Choose your target and go to Build Settings Under Other Linker Flags add ObjC for both Release and Debug Source https developers.google.com..
How can I make my ad hoc iPhone application's icon show up in iTunes? http://stackoverflow.com/questions/173247/how-can-i-make-my-ad-hoc-iphone-applications-icon-show-up-in-itunes steps to add it to your application Open your project in Xcode. In the Groups Files list select the Resources group. Choose Project Add to Project navigate to your iTunesArtwork file and click Add. In the dialog that appears select the 𨌆opy items..
Signal 11, segmentation fault on iphone App exit http://stackoverflow.com/questions/1849929/signal-11-segmentation-fault-on-iphone-app-exit with NSZombieEnabled. This will tell you if you're over releasing any object. To enable zombies do the following Choose Project Edit Active Executable to open the executable Info window. Click Arguments. Click the add button in the 𦛼ariables..
XCode 5 Crashes on AppStore Validation http://stackoverflow.com/questions/18913964/xcode-5-crashes-on-appstore-validation button. Click the Add button in the upper right corner. Select App Store as the distribution method click Continue. Choose your App ID Continue Choose your Certificate. NOTE Make sure you select a certificate for which you have the private key.. in the upper right corner. Select App Store as the distribution method click Continue. Choose your App ID Continue Choose your Certificate. NOTE Make sure you select a certificate for which you have the private key see Applications Utilities..
How can I skip compressing one PNG? http://stackoverflow.com/questions/2051947/how-can-i-skip-compressing-one-png being optimized you change its file type so Xcode no longer knows it's a PNG. Select the file in the project window. Choose File Get Info. On the General tab change File Type from image.png to file . This is actually the default when you add a..
Detecting programmatically whether an app is installed on iPhone http://stackoverflow.com/questions/3808691/detecting-programmatically-whether-an-app-is-installed-on-iphone sharedApplication openURL NSURL URLWithString @ http www.pavan.com WhyTheHellDidTheAppNotOpen_what_now.html Choose one option I've just spoiled you with choice. Choose one that fits your requirements. In my case I had to use all three.. @ http www.pavan.com WhyTheHellDidTheAppNotOpen_what_now.html Choose one option I've just spoiled you with choice. Choose one that fits your requirements. In my case I had to use all three options in different areas of the program. share improve..
Choose OpenGL ES 1.1 or OpenGL ES 2.0? http://stackoverflow.com/questions/4784137/choose-opengl-es-1-1-or-opengl-es-2-0 OpenGL ES 1.1 or OpenGL ES 2.0 I'm going to start a new cross plattform openGL project primary for iPhone PC . So theres..
Xcode4: Different code generated for custom core data managed objects http://stackoverflow.com/questions/5253753/xcode4-different-code-generated-for-custom-core-data-managed-objects in Xcode3 Go to the model editor Select the entity you wish to generate source code for Go to File New New Files Choose managedobject class or whatever it was I can't open xcode3 anymore to verify Select entities you wish to generate the previously.. to do it but I'm not sure because it generates different code Go to model editor Select entity Go to File New New File Choose NSManagedObject subclass Choose location and create. The code it is generating is different for a number of reasons The.. it generates different code Go to model editor Select entity Go to File New New File Choose NSManagedObject subclass Choose location and create. The code it is generating is different for a number of reasons The generated code for adding and removing..
Example or explanation of Core Data Migration with multiple passes? http://stackoverflow.com/questions/5995231/example-or-explanation-of-core-data-migration-with-multiple-passes . Back to our two mapping models. We create the first mapping model like this 1. New File Resource Mapping Model 2. Choose a name I chose StepOne 3. Set source and destination data model Mapping Model Step One The multi pass migration doesn't..
http://stackoverflow.com/questions/6769345/xcode-4-valid-signing-identity-not-found-error-on-provisioning-profiles-on-a On your existing machine launch Xcode and do this Open the Organizer Shift Command 2 . Select the Devices tab. Choose Developer Profile in the upper left corner under LIBRARY which may be under the heading library or under a heading called.. Profile in the upper left corner under LIBRARY which may be under the heading library or under a heading called TEAMS. Choose Export near the bottom left side of the window. Xcode asks you to choose a file name and password. On your new machine launch..
Choose custom sound for local notifications http://stackoverflow.com/questions/7170475/choose-custom-sound-for-local-notifications custom sound for local notifications how do you change the sound that plays for local notifications I use the code below..
How to submit an iOS app WITHOUT XCode? http://stackoverflow.com/questions/7924085/how-to-submit-an-ios-app-without-xcode Password and select Next After your authenticated select Next Select your App and click Next Confirm App compatability Choose the binary file to upload Select and click Next Start the upload by clicking Send It will will take a few moments to authenticate..
Steps to upload an iPhone application to the AppStore http://stackoverflow.com/questions/796482/steps-to-upload-an-iphone-application-to-the-appstore If your settings are correct but you still aren't getting that upload finished properly clean your builds. Choose Build Clean Command Shift K and click Clean. Alternatively you can manually trash the build folder in your Project from..
|
