¡@
2014/10/15 ¤U¤È 10:12:29
iphone Programming Glossary: pasthttp://stackoverflow.com/questions/1166444/mkmapview-zoom-and-region the region back into your allowed zoom levels. Kind of like how table views will let you scroll past the edge but will then rubber band back into place. However your mileage may vary since I haven't used..
How do I break down an NSTimeInterval into year, months, days, hours, minutes and seconds on iPhone? http://stackoverflow.com/questions/1237778/how-do-i-break-down-an-nstimeinterval-into-year-months-days-hours-minutes-an year month day hour minute sec When I set the date picker to a date 1 year and 1 day in the past I get 1 years 1 months 1 days 16 hours 0 minutes 20 seconds which is 1 month and 16 hours off. If I.. 0 minutes 20 seconds which is 1 month and 16 hours off. If I set the date picker to 1 day in the past I am off by the same amount. Update I have an app that calculates your age in years given your birthday..
iOS crash reports: atos not working as expected http://stackoverflow.com/questions/13574933/ios-crash-reports-atos-not-working-as-expected the very front of the line which contains your executable. Usually the first entry . Since in the past value of the slide was equal to value of the load address this always worked. But since Apple introduced..
iPhone sending POST with NSURLConnection http://stackoverflow.com/questions/2071788/iphone-sending-post-with-nsurlconnection And my script.php is as simple as this php echo _POST 'mydata' This have worked for me in the past but for some reason the output I get from NSLog @ responseData @ responseData now is just instead of..
http://stackoverflow.com/questions/3097244/exit-application-in-ios-4-0 Programmatically . And we have seen many reports of apps that had calls to exit in them in the past. Exiting instead of suspending by setting the appropriate key in the Info.plist file is perfectly fine..
How to build a framework or library for other developers, the secure way? http://stackoverflow.com/questions/4065052/how-to-build-a-framework-or-library-for-other-developers-the-secure-way make an compiled framework library that other iOS developers can use without beeing able to copy paste our source codes then is there a way to obfuscate the objective c code iphone ipad frameworks ios.. code. Check out these articles I've successfully used the first one to create frameworks in the past the later articles are updates to the original http www.drobnik.com touch 2010 04 making your own iphone..
Is there any ready-made calendar control for iPhone apps? http://stackoverflow.com/questions/997779/is-there-any-ready-made-calendar-control-for-iphone-apps for iPhone apps I am building an applicaiton for the iPhone that will display upcoming and past events. I settled for a list view but then I realized that a calendar just like the one displayed in..
http://stackoverflow.com/questions/1166444/mkmapview-zoom-and-region method mapView regionWillChangeAnimated e.g. by resizing the region back into your allowed zoom levels. Kind of like how table views will let you scroll past the edge but will then rubber band back into place. However your mileage may vary since I haven't used it for this purpose. btw there are definite fixes improvements..
How do I break down an NSTimeInterval into year, months, days, hours, minutes and seconds on iPhone? http://stackoverflow.com/questions/1237778/how-do-i-break-down-an-nstimeinterval-into-year-months-days-hours-minutes-an @ d years n d months n d days n d hours n d minutes n d seconds year month day hour minute sec When I set the date picker to a date 1 year and 1 day in the past I get 1 years 1 months 1 days 16 hours 0 minutes 20 seconds which is 1 month and 16 hours off. If I set the date picker to 1 day in the past I am off by the same.. and 1 day in the past I get 1 years 1 months 1 days 16 hours 0 minutes 20 seconds which is 1 month and 16 hours off. If I set the date picker to 1 day in the past I am off by the same amount. Update I have an app that calculates your age in years given your birthday set from a UIDatePicker yet it was often off. This proves..
iOS crash reports: atos not working as expected http://stackoverflow.com/questions/13574933/ios-crash-reports-atos-not-working-as-expected is the first address showing in the Binary Images section at the very front of the line which contains your executable. Usually the first entry . Since in the past value of the slide was equal to value of the load address this always worked. But since Apple introduced Address space layout randomization beginning with iOS 4.3..
iPhone sending POST with NSURLConnection http://stackoverflow.com/questions/2071788/iphone-sending-post-with-nsurlconnection response error err NSLog @ responseData @ responseData And my script.php is as simple as this php echo _POST 'mydata' This have worked for me in the past but for some reason the output I get from NSLog @ responseData @ responseData now is just instead of theData . Probably some lame mistake somewhere but I can't..
http://stackoverflow.com/questions/3097244/exit-application-in-ios-4-0 popping up again iOS Human Interface Guidelines says Don't Quit Programmatically . And we have seen many reports of apps that had calls to exit in them in the past. Exiting instead of suspending by setting the appropriate key in the Info.plist file is perfectly fine of course but that's not a dedicated UI Button just application..
How to build a framework or library for other developers, the secure way? http://stackoverflow.com/questions/4065052/how-to-build-a-framework-or-library-for-other-developers-the-secure-way the compiled framework I guess. Or if it is not possible to make an compiled framework library that other iOS developers can use without beeing able to copy paste our source codes then is there a way to obfuscate the objective c code iphone ipad frameworks ios share improve this question Yes it is possible to build.. frameworks so the user of the framework can't see the source code. Check out these articles I've successfully used the first one to create frameworks in the past the later articles are updates to the original http www.drobnik.com touch 2010 04 making your own iphone frameworks http www.drobnik.com touch 2010 05 making your..
Is there any ready-made calendar control for iPhone apps? http://stackoverflow.com/questions/997779/is-there-any-ready-made-calendar-control-for-iphone-apps there any ready made calendar control for iPhone apps I am building an applicaiton for the iPhone that will display upcoming and past events. I settled for a list view but then I realized that a calendar just like the one displayed in the month view in the built in Calendar application would be..
iOS Image Orientation has Strange Behavior http://stackoverflow.com/questions/10600613/ios-image-orientation-has-strange-behavior Image Orientation has Strange Behavior For the past few weeks I've been working with images in objective c and noticing a lot of strange behavior. First like many other people..
How does the iOS app Display Recorder record the screen without using private API? http://stackoverflow.com/questions/11090184/how-does-the-ios-app-display-recorder-record-the-screen-without-using-private-ap uses it thereby escaping detection. It does look like my initial suspicion was correct it is using IOSurface to sneak past sandbox restrictions to have raw screen access. It also uses UIGetScreenImage which I assume is for the second method of..
how do I use UIScrollView in Interface Builder? http://stackoverflow.com/questions/1135163/how-do-i-use-uiscrollview-in-interface-builder do I use UIScrollView in Interface Builder While I've used UIScrollView successfully in the past by manipulating it programmatically I'm having trouble getting it to work by setting it up exclusively in Interface Builder...
http://stackoverflow.com/questions/1166444/mkmapview-zoom-and-region e.g. by resizing the region back into your allowed zoom levels. Kind of like how table views will let you scroll past the edge but will then rubber band back into place. However your mileage may vary since I haven't used it for this purpose...
How do I break down an NSTimeInterval into year, months, days, hours, minutes and seconds on iPhone? http://stackoverflow.com/questions/1237778/how-do-i-break-down-an-nstimeinterval-into-year-months-days-hours-minutes-an n d minutes n d seconds year month day hour minute sec When I set the date picker to a date 1 year and 1 day in the past I get 1 years 1 months 1 days 16 hours 0 minutes 20 seconds which is 1 month and 16 hours off. If I set the date picker.. 1 days 16 hours 0 minutes 20 seconds which is 1 month and 16 hours off. If I set the date picker to 1 day in the past I am off by the same amount. Update I have an app that calculates your age in years given your birthday set from a UIDatePicker..
iOS crash reports: atos not working as expected http://stackoverflow.com/questions/13574933/ios-crash-reports-atos-not-working-as-expected Images section at the very front of the line which contains your executable. Usually the first entry . Since in the past value of the slide was equal to value of the load address this always worked. But since Apple introduced Address space layout..
Upload live streaming video from iPhone like Ustream or Qik http://stackoverflow.com/questions/1960782/upload-live-streaming-video-from-iphone-like-ustream-or-qik function above you add the samples into an AVAssetWriter . I actually had three asset writers active at a time past present and future managed on different threads. The past writer is in the process of closing the movie file and uploading.. . I actually had three asset writers active at a time past present and future managed on different threads. The past writer is in the process of closing the movie file and uploading it. The current writer is receiving the sample buffers.. The future writer is in the process of opening a new movie file and preparing it for data. Every 5 seconds I set past current current future and restart the sequence. This then uploads video in 5 second chunks to the server. You can stitch..
iPhone sending POST with NSURLConnection http://stackoverflow.com/questions/2071788/iphone-sending-post-with-nsurlconnection @ responseData And my script.php is as simple as this php echo _POST 'mydata' This have worked for me in the past but for some reason the output I get from NSLog @ responseData @ responseData now is just instead of theData . Probably..
Network Time Protocol for iPhone http://stackoverflow.com/questions/2269532/network-time-protocol-for-iphone ntp share improve this question There's a small iOS library named ios ntp . I have used it in one project in the past and it seemed to work reasonably well. As of mid 2013 the original ios ntp project has a few missing pieces so I have mirrored..
http://stackoverflow.com/questions/3097244/exit-application-in-ios-4-0 says Don't Quit Programmatically . And we have seen many reports of apps that had calls to exit in them in the past. Exiting instead of suspending by setting the appropriate key in the Info.plist file is perfectly fine of course but that's..
How to build a framework or library for other developers, the secure way? http://stackoverflow.com/questions/4065052/how-to-build-a-framework-or-library-for-other-developers-the-secure-way it is not possible to make an compiled framework library that other iOS developers can use without beeing able to copy paste our source codes then is there a way to obfuscate the objective c code iphone ipad frameworks ios share improve this.. can't see the source code. Check out these articles I've successfully used the first one to create frameworks in the past the later articles are updates to the original http www.drobnik.com touch 2010 04 making your own iphone frameworks http..
Uploading live streaming video from iPhone [duplicate] http://stackoverflow.com/questions/5062266/uploading-live-streaming-video-from-iphone function above you add the samples into an AVAssetWriter . I actually had three asset writers active at a time past present and future managed on different threads. The past writer is in the process of closing the movie file and uploading.. . I actually had three asset writers active at a time past present and future managed on different threads. The past writer is in the process of closing the movie file and uploading it. The current writer is receiving the sample buffers.. The future writer is in the process of opening a new movie file and preparing it for data. Every 5 seconds I set past current current future and restart the sequence. This then uploads video in 5 second chunks to the server. You can stitch..
Tap pressure strength detection using accelerometer http://stackoverflow.com/questions/5179426/tap-pressure-strength-detection-using-accelerometer float total 0.0f for int loop 0 loop sz loop total pressureValues loop float average total sz start with most recent past pressure sample if setNextPressureValue KNumberOfPressureSamples float mostRecent pressureValues currentPressureValueIndex..
http://stackoverflow.com/questions/7798891/detect-silent-mode-in-ios5 Silent mode in iOS5 I have used this method in the past to detect if the silent switch is enabled BOOL silenced #if TARGET_IPHONE_SIMULATOR return NO in simulator. Code causes..
Removing App ID from Developer Connection http://stackoverflow.com/questions/996477/removing-app-id-from-developer-connection apple share improve this question Update You can now remove an App ID as noted by @Guru in the comments . In the past this was not possible I had the same problem and the folks at Apple replied that they will leave all of the App ID you create..
Is there any ready-made calendar control for iPhone apps? http://stackoverflow.com/questions/997779/is-there-any-ready-made-calendar-control-for-iphone-apps made calendar control for iPhone apps I am building an applicaiton for the iPhone that will display upcoming and past events. I settled for a list view but then I realized that a calendar just like the one displayed in the month view in the..
|