¡@
2014/10/15 ¤U¤È 10:12:47
iphone Programming Glossary: plistAutorotate in iOS 6 has strange behaviour http://stackoverflow.com/questions/12526054/autorotate-in-ios-6-has-strange-behaviour do this. I present MPMoviePlayerViewController but it doesn't rotate as in iOS 5 and earlier. In plist setting I've set only 1 Portrait interface orientation. If I set other whole app will be rotated. iphone.. ™s supported orientations with the app ™s supported orientations as determined by the Info.plist file or the app delegate ™s application supportedInterfaceOrientationsForWindow method to determine whether.. autorotation behaviors. In other words they do not fall back to using the app app delegate or Info.plist file to determine the supported orientations. Instead the shouldAutorotateToInterfaceOrientation method..
IOS 6 force device orientation to landscape http://stackoverflow.com/questions/12640870/ios-6-force-device-orientation-to-landscape . Why it happens Also NONE of above 3 methods are getting called. Some useful data In my plist file I have specified 3 orientations all but upside down. The project was started in Xcode 4.3 IOS 5... 5. All classes including xibs were created before Xcode 4.5 IOS 6 now I use the last version. In plist file the status bar is set to visible. In xib file the one I want to be in landscape the status bar..
Landscape Mode ONLY for iPhone or iPad http://stackoverflow.com/questions/2647786/landscape-mode-only-for-iphone-or-ipad want to create an application that doesn't use Portrait mode. I am not sure if I need to edit the plist or have code in addition to the plist iphone objective c cocoa touch uikit ipad share improve this.. use Portrait mode. I am not sure if I need to edit the plist or have code in addition to the plist iphone objective c cocoa touch uikit ipad share improve this question Code found here Launching.. following steps to make it launch in a landscape orientation initially. In your application ™s Info.plist file add the UIInterfaceOrientation key and set its value to the landscape mode. For landscape orientations..
How To Make iPhone App compatible with multiple SDK (firmware) versions http://stackoverflow.com/questions/3027120/how-to-make-iphone-app-compatible-with-multiple-sdk-firmware-versions support older devices you need to add armv6 to the build architectures and remove armv7 from the plist of required device capabilities. See these SO questions and answers for more details deployment target..
NSDictionary with ordered keys http://stackoverflow.com/questions/376090/nsdictionary-with-ordered-keys this is a situation any other folks have found themselves in. I have an NSDictionary stored in a plist that I'm basically using as an associative array strings as keys and values . I want to use the array..
iPhone - Backgrounding to poll for events http://stackoverflow.com/questions/4656214/iphone-backgrounding-to-poll-for-events quit by the system . This we will abuse later. In my case I used VoIP backgrounding enabled in my plist. All the code here is done in your AppDelegate if the iOS device allows background execution this Handler..
Lock-down iPhone/iPod/iPad so it can only run one app http://stackoverflow.com/questions/5011774/lock-down-iphone-ipod-ipad-so-it-can-only-run-one-app pretty trivial to make this work all you need to do is install a correctly formatted mobile config plist over the air from a web server. To deliver your config from the web all you have to do is direct the.. Profiles your profile remove it. Reboot you should be back to normal. I have included an example plist that will disable the home button and lock your device into the app. BEWARE Once this profile is installed.. then reboot the device. Everything will be back to normal. xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key..
How to distribute ios application wirelessly without managing UDIDs and recompilation http://stackoverflow.com/questions/5546581/how-to-distribute-ios-application-wirelessly-without-managing-udids-and-recompil slightly different if you're using a different version. Basically you have to add an Entitlements.plist file to your resources New File Code Signing Entitlements and before you distribute you have to change.. file itms services action download manifest url ftp 3A 2F 2Fftp.company.com 2FInstallers 2FmyApp.plist Now when you send this email to someone they just need to first download and install the .mobileprovision.. apps but it requires you to have a PHP server. What you do is create a PHP file that generates the plist file on the fly and returns that. In the links for large image small image and ipa file you pass in..
http://stackoverflow.com/questions/905542/how-to-write-data-in-plist to write data in plist I have created save.plist in resource folder. I have written some data within that directly without.. to write data in plist I have created save.plist in resource folder. I have written some data within that directly without using coding . I am able to.. using coding . I am able to read that data but I cant able write through coding into the same save.plist. By using following code I am trying to write the data but it get stored within my .app plist. The code..
Autorotate in iOS 6 has strange behaviour http://stackoverflow.com/questions/12526054/autorotate-in-ios-6-has-strange-behaviour player view I can only rotate whole app but don't want to do this. I present MPMoviePlayerViewController but it doesn't rotate as in iOS 5 and earlier. In plist setting I've set only 1 Portrait interface orientation. If I set other whole app will be rotated. iphone objective c ios mpmovieplayercontroller ios6 share improve.. shouldAutorotate method. The system intersects the view controller ™s supported orientations with the app ™s supported orientations as determined by the Info.plist file or the app delegate ™s application supportedInterfaceOrientationsForWindow method to determine whether to rotate. The system determines whether an orientation.. method do not get the new autorotation behaviors. In other words they do not fall back to using the app app delegate or Info.plist file to determine the supported orientations. Instead the shouldAutorotateToInterfaceOrientation method is used to synthesize the information that would be returned..
IOS 6 force device orientation to landscape http://stackoverflow.com/questions/12640870/ios-6-force-device-orientation-to-landscape only UIInterfaceOrientationMaskLandscape . Why it happens Also NONE of above 3 methods are getting called. Some useful data In my plist file I have specified 3 orientations all but upside down. The project was started in Xcode 4.3 IOS 5. All classes including xibs were created before Xcode 4.5 IOS.. all but upside down. The project was started in Xcode 4.3 IOS 5. All classes including xibs were created before Xcode 4.5 IOS 6 now I use the last version. In plist file the status bar is set to visible. In xib file the one I want to be in landscape the status bar is None the orientation is set to landscape. Any help is appreciated...
Landscape Mode ONLY for iPhone or iPad http://stackoverflow.com/questions/2647786/landscape-mode-only-for-iphone-or-ipad Mode ONLY for iPhone or iPad I want to create an application that doesn't use Portrait mode. I am not sure if I need to edit the plist or have code in addition to the plist iphone objective c cocoa touch uikit ipad share improve this question Code found here Launching in Landscape Mode Applications.. for iPhone or iPad I want to create an application that doesn't use Portrait mode. I am not sure if I need to edit the plist or have code in addition to the plist iphone objective c cocoa touch uikit ipad share improve this question Code found here Launching in Landscape Mode Applications in iPhone OS normally launch.. runs in landscape mode only however you must perform the following steps to make it launch in a landscape orientation initially. In your application ™s Info.plist file add the UIInterfaceOrientation key and set its value to the landscape mode. For landscape orientations you can set the value of this key to UIInterfaceOrientationLandscapeLeft..
How To Make iPhone App compatible with multiple SDK (firmware) versions http://stackoverflow.com/questions/3027120/how-to-make-iphone-app-compatible-with-multiple-sdk-firmware-versions features that need newer SDK support. NEW w XCode 4.2 To support older devices you need to add armv6 to the build architectures and remove armv7 from the plist of required device capabilities. See these SO questions and answers for more details deployment target vs base active sdk recommended way to support backward compatibility..
NSDictionary with ordered keys http://stackoverflow.com/questions/376090/nsdictionary-with-ordered-keys with ordered keys I'm curious if this is a situation any other folks have found themselves in. I have an NSDictionary stored in a plist that I'm basically using as an associative array strings as keys and values . I want to use the array of keys as part of my application but I'd like them to be..
iPhone - Backgrounding to poll for events http://stackoverflow.com/questions/4656214/iphone-backgrounding-to-poll-for-events app will be launched by iOS in background again once it was quit by the system . This we will abuse later. In my case I used VoIP backgrounding enabled in my plist. All the code here is done in your AppDelegate if the iOS device allows background execution this Handler will be called void backgroundHandler NSLog @ ### VOIP..
Lock-down iPhone/iPod/iPad so it can only run one app http://stackoverflow.com/questions/5011774/lock-down-iphone-ipod-ipad-so-it-can-only-run-one-app sign apps then you will know what I mean. It is actually pretty trivial to make this work all you need to do is install a correctly formatted mobile config plist over the air from a web server. To deliver your config from the web all you have to do is direct the iPhone to a url containing the profile. Just open the link.. else or you will need to reboot again Settings General Profiles your profile remove it. Reboot you should be back to normal. I have included an example plist that will disable the home button and lock your device into the app. BEWARE Once this profile is installed the first app that is launched when the device is rebooted.. remove the profile plug the device into IPCU and delete it then reboot the device. Everything will be back to normal. xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key PayloadContent key array dict key PayloadDescription key string..
How to distribute ios application wirelessly without managing UDIDs and recompilation http://stackoverflow.com/questions/5546581/how-to-distribute-ios-application-wirelessly-without-managing-udids-and-recompil the same if it does work. I'm using XCode 4 so this may be slightly different if you're using a different version. Basically you have to add an Entitlements.plist file to your resources New File Code Signing Entitlements and before you distribute you have to change Can be debugged to NO Make sure your project is set up with.. Installers profile.mobileprovision and for the .ipa file itms services action download manifest url ftp 3A 2F 2Fftp.company.com 2FInstallers 2FmyApp.plist Now when you send this email to someone they just need to first download and install the .mobileprovision file then the .ipa file. Viola they are running your program... ID's. Edit I've found a much better way of distributing apps but it requires you to have a PHP server. What you do is create a PHP file that generates the plist file on the fly and returns that. In the links for large image small image and ipa file you pass in links to other PHP files that return those things for your specific..
http://stackoverflow.com/questions/905542/how-to-write-data-in-plist to write data in plist I have created save.plist in resource folder. I have written some data within that directly without using coding . I am able to read that data but I cant able.. to write data in plist I have created save.plist in resource folder. I have written some data within that directly without using coding . I am able to read that data but I cant able write through coding into the.. I have written some data within that directly without using coding . I am able to read that data but I cant able write through coding into the same save.plist. By using following code I am trying to write the data but it get stored within my .app plist. The code is here NSString errorDesc nil NSPropertyListFormat format..
Autorotate in iOS 6 has strange behaviour http://stackoverflow.com/questions/12526054/autorotate-in-ios-6-has-strange-behaviour app but don't want to do this. I present MPMoviePlayerViewController but it doesn't rotate as in iOS 5 and earlier. In plist setting I've set only 1 Portrait interface orientation. If I set other whole app will be rotated. iphone objective c ios.. the view controller ™s supported orientations with the app ™s supported orientations as determined by the Info.plist file or the app delegate ™s application supportedInterfaceOrientationsForWindow method to determine whether to rotate. The.. do not get the new autorotation behaviors. In other words they do not fall back to using the app app delegate or Info.plist file to determine the supported orientations. Instead the shouldAutorotateToInterfaceOrientation method is used to synthesize..
IOS 6 force device orientation to landscape http://stackoverflow.com/questions/12640870/ios-6-force-device-orientation-to-landscape . Why it happens Also NONE of above 3 methods are getting called. Some useful data In my plist file I have specified 3 orientations all but upside down. The project was started in Xcode 4.3 IOS 5. All classes including.. in Xcode 4.3 IOS 5. All classes including xibs were created before Xcode 4.5 IOS 6 now I use the last version. In plist file the status bar is set to visible. In xib file the one I want to be in landscape the status bar is None the orientation..
Landscape Mode ONLY for iPhone or iPad http://stackoverflow.com/questions/2647786/landscape-mode-only-for-iphone-or-ipad iPhone or iPad I want to create an application that doesn't use Portrait mode. I am not sure if I need to edit the plist or have code in addition to the plist iphone objective c cocoa touch uikit ipad share improve this question Code found.. application that doesn't use Portrait mode. I am not sure if I need to edit the plist or have code in addition to the plist iphone objective c cocoa touch uikit ipad share improve this question Code found here Launching in Landscape Mode Applications.. must perform the following steps to make it launch in a landscape orientation initially. In your application ™s Info.plist file add the UIInterfaceOrientation key and set its value to the landscape mode. For landscape orientations you can set..
How To Make iPhone App compatible with multiple SDK (firmware) versions http://stackoverflow.com/questions/3027120/how-to-make-iphone-app-compatible-with-multiple-sdk-firmware-versions NEW w XCode 4.2 To support older devices you need to add armv6 to the build architectures and remove armv7 from the plist of required device capabilities. See these SO questions and answers for more details deployment target vs base active sdk..
NSDictionary with ordered keys http://stackoverflow.com/questions/376090/nsdictionary-with-ordered-keys keys I'm curious if this is a situation any other folks have found themselves in. I have an NSDictionary stored in a plist that I'm basically using as an associative array strings as keys and values . I want to use the array of keys as part of..
iPhone - Backgrounding to poll for events http://stackoverflow.com/questions/4656214/iphone-backgrounding-to-poll-for-events again once it was quit by the system . This we will abuse later. In my case I used VoIP backgrounding enabled in my plist. All the code here is done in your AppDelegate if the iOS device allows background execution this Handler will be called..
Lock-down iPhone/iPod/iPad so it can only run one app http://stackoverflow.com/questions/5011774/lock-down-iphone-ipod-ipad-so-it-can-only-run-one-app It is actually pretty trivial to make this work all you need to do is install a correctly formatted mobile config plist over the air from a web server. To deliver your config from the web all you have to do is direct the iPhone to a url containing.. Settings General Profiles your profile remove it. Reboot you should be back to normal. I have included an example plist that will disable the home button and lock your device into the app. BEWARE Once this profile is installed the first app.. IPCU and delete it then reboot the device. Everything will be back to normal. xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key PayloadContent key..
How to distribute ios application wirelessly without managing UDIDs and recompilation http://stackoverflow.com/questions/5546581/how-to-distribute-ios-application-wirelessly-without-managing-udids-and-recompil 4 so this may be slightly different if you're using a different version. Basically you have to add an Entitlements.plist file to your resources New File Code Signing Entitlements and before you distribute you have to change Can be debugged to.. and for the .ipa file itms services action download manifest url ftp 3A 2F 2Fftp.company.com 2FInstallers 2FmyApp.plist Now when you send this email to someone they just need to first download and install the .mobileprovision file then the.. way of distributing apps but it requires you to have a PHP server. What you do is create a PHP file that generates the plist file on the fly and returns that. In the links for large image small image and ipa file you pass in links to other PHP files..
http://stackoverflow.com/questions/905542/how-to-write-data-in-plist to write data in plist I have created save.plist in resource folder. I have written some data within that directly without using coding . I am.. to write data in plist I have created save.plist in resource folder. I have written some data within that directly without using coding . I am able to read that data but.. directly without using coding . I am able to read that data but I cant able write through coding into the same save.plist. By using following code I am trying to write the data but it get stored within my .app plist. The code is here NSString..
How to turn on/off airplane mode in IOS 5.1 using private API http://stackoverflow.com/questions/10452640/how-to-turn-on-off-airplane-mode-in-ios-5-1-using-private-api the airplaneMode property. Here's a sample entitlements.xml file to add to your project DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key com.apple.SystemConfiguration.SCDynamicStore..
what is the first step in (NSTimer release and invalidate)? http://stackoverflow.com/questions/1171393/what-is-the-first-step-in-nstimer-release-and-invalidate
http://stackoverflow.com/questions/1968323/get-iphone-id-in-web-app you web page Example .mobileconfig for retrieving a UDID xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key PayloadContent key dict key URL key string.. receive a 'data' query string parameter containing the xml response from the phone. DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key IMEI key string 12 123456 123456 7 string..
Suggestions on implementing an iPad magazine app http://stackoverflow.com/questions/2853881/suggestions-on-implementing-an-ipad-magazine-app
iPhone Core Data Lightweight Migration Cocoa error 134130: Can't find model for source store http://stackoverflow.com/questions/3146515/iphone-core-data-lightweight-migration-cocoa-error-134130-cant-find-model-for 2 Here is what happens when I inspect VersionInfo.plist xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key NSManagedObjectModel_CurrentVersionName key..
Build fat static library (device + simulator) using Xcode and SDK 4+ http://stackoverflow.com/questions/3520977/build-fat-static-library-device-simulator-using-xcode-and-sdk-4 each other from Xcode 3.x through to Xcode 4.6.x Bonus script to let you auto include Bundles i.e. include PNG files PLIST files etc from your library see below scroll to bottom now supports iPhone5 using Apple's workaround to the bugs in lipo.. ...that is the location of your Universal Build. How to include non sourcecode files in your project PNG PLIST XML etc Do everything above check it works Create a new Run Script phase that comes AFTER THE FIRST ONE copy paste the code..
How to sort a NSArray which contains NSDictionary? http://stackoverflow.com/questions/4767219/how-to-sort-a-nsarray-which-contains-nsdictionary which contains NSDictionary I have a plist like this xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key highscores key array dict key highscoreInSeconds.. Have a nice day. PS It should look like this at the end xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key highscores key array dict key highscoreInSeconds..
sectioned UITableView sourced from a pList http://stackoverflow.com/questions/4850659/sectioned-uitableview-sourced-from-a-plist the code below. Your plist file would look like this xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 array dict key Title key string Section1 string key..
Lock-down iPhone/iPod/iPad so it can only run one app http://stackoverflow.com/questions/5011774/lock-down-iphone-ipod-ipad-so-it-can-only-run-one-app reboot the device. Everything will be back to normal. xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key PayloadContent key array dict key PayloadDescription..
Facebook iOS Safari “Cannot Open Page Error” When Authenticating User with Single-Sign-On http://stackoverflow.com/questions/5131178/facebook-ios-safari-cannot-open-page-error-when-authenticating-user-with-singl would be great I'm banging my head here. My info.plist xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key CFBundleURLTypes key array dict key CFBundleURLName..
plist in xcode creation problem http://stackoverflow.com/questions/6693333/plist-in-xcode-creation-problem as Array.. then its XML Contents will be as below xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key Root key array string Firecracker string.. object... so your plist file must be like this xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 array string Firecracker string string Lemon Drop..
How to read data structure from .plist file into NSArray http://stackoverflow.com/questions/749504/how-to-read-data-structure-from-plist-file-into-nsarray the file leagues.plist which has the following structure xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 array dict key category key string English string..
“Can't find model for source store” occurring during iphone “Automatic Lightweight Migration”? http://stackoverflow.com/questions/7624502/cant-find-model-for-source-store-occurring-during-iphone-automatic-lightweig rw r r 1 greg staff 480 5 Sep 21 06 VersionInfo.plist xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key NSManagedObjectModel_CurrentVersionName key.. staff 2920 2 Oct 12 47 MyApp.omo rw r r 1 greg staff 665 2 Oct 12 47 VersionInfo.plist DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key NSManagedObjectModel_CurrentVersionName key..
http://stackoverflow.com/questions/8007112/mdm-push-certificate-creation of this plist should be following this is from apple doc xml version 1.0 encoding UTF 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key PushCertRequestCSR key string MIIDjzCCAncCAQAwDzENMAsGA1UEAwwEdGVzdDCCASIwDQYJKoZIhvcNAQEBBQAD..
Any demo example Multiple Map Annotation using plist? http://stackoverflow.com/questions/12155753/any-demo-example-multiple-map-annotation-using-plist read plist on map iphone objective c ios xcode ipad share improve this question First get All The Locations from Plist and put them into an Array. NSArray paths NSSearchPathForDirectoriesInDomains NSDocumentDirectory NSUserDomainMask YES NSString.. YES NSString documentsPath paths objectAtIndex 0 NSString fooPath documentsPath stringByAppendingPathComponent @ yourPlistFile.plist NSLog fooPath NSArray contentArray NSArray arrayWithContentsOfFile fooPath NSLog @ @ contentArray Use Below code..
Use custom fonts in iPhone App [duplicate] http://stackoverflow.com/questions/13029660/use-custom-fonts-in-iphone-app and the code is UIFont customFont UIFont fontWithName @ MYRIADPRO SEMIBOLD size 35 titleLbl.font customFont And the Plist is iphone ios fonts share improve this question Try below Steps. 1 Make configuration in info.plist as shown in Image..
Displaying Plist data into UItableview http://stackoverflow.com/questions/13912735/displaying-plist-data-into-uitableview Plist data into UItableview I have a plist with Dictionary and numbers of strings per dictionary.show into the url below.and.. NSUserDomainMask YES NSString documentsDirectory documentPaths objectAtIndex 0 NSString documentPlistPath documentsDirectory stringByAppendingPathComponent @ p.plist NSDictionary dict NSDictionary dictionaryWithContentsOfFile.. stringByAppendingPathComponent @ p.plist NSDictionary dict NSDictionary dictionaryWithContentsOfFile documentPlistPath valueArray dict objectForKey @ title self.mySections valueArray copy NSLog @ value array @ self.mySections NSInteger..
http://stackoverflow.com/questions/13987238/plist-search-of-tableview Search of Tableview I have Plist which is been populated on the tableview with expanded sections ..now i want to search.. Search of Tableview I have Plist which is been populated on the tableview with expanded sections ..now i want to search the table..below in images you can..
http://stackoverflow.com/questions/1680367/changing-data-in-a-plist Data in a Plist Hey alright so I have a .plist that looks like plist version 1.0 dict key Item 0 key dict key Name key string Jero string..
How do I format a text file to be read in using arrayWithContentsOfFile http://stackoverflow.com/questions/3011898/how-do-i-format-a-text-file-to-be-read-in-using-arraywithcontentsoffile iphone text file nsarray share improve this question myTextFile.txt should be in .plist format so use the XCode Plist editor to create it and fill it up with data. From the docs arrayWithContentsOfFile id arrayWithContentsOfFile NSString..
how to write NSMutableDictionary into Plist http://stackoverflow.com/questions/3984722/how-to-write-nsmutabledictionary-into-plist to write NSMutableDictionary into Plist can any one help me with this how to write a NSMutableDictionary into a plist.... thanks in advance.. iphone objective..
http://stackoverflow.com/questions/5116831/not-able-to-write-to-plist able to write to Plist I have a very basic question about how to write to a plist. I added a Here.plist file to my resources folder. The following..
xcode info.plist build variable ${PRODUCT_NAME:rfc1034identifier} seems completely undocumented? http://stackoverflow.com/questions/5173472/xcode-info-plist-build-variable-product-namerfc1034identifier-seems-complete how do we know it's a modifier specification. Well we know because it works on multiple variables in build settings. Plist preprocessor probably uses the same mechanisms to resolve build variables as does the build system. Hack Saw if you get..
iPhone - different ways to store data, advantages and disadvantages http://stackoverflow.com/questions/5785011/iphone-different-ways-to-store-data-advantages-and-disadvantages read coredatas already written is hard possible iphone xml core data save plist share improve this question Plist files are another option if you want to manage your own storage on the file system. NSArray and NSDictionary provide methods..
Should I use NSUserDefaults or a plist to store data? http://stackoverflow.com/questions/7058858/should-i-use-nsuserdefaults-or-a-plist-to-store-data improve this question I am assuming an array but it will work with dictionaries too. Userdefaults Core Data and Plists can all be read write but if you use a plist you need to pay attention in what dir you put it. See the plist part down.. To read the from the userdefaults NSArray stringsArray NSUserDefaults standardUserDefaults objectForKey @ MyStrings Plist If your strings are going to be modified you will need to write and read a plist but you cant't write into your app's resources... directory NSArray paths NSSearchPathForDirectoriesInDomains NSDocumentDirectory NSUserDomainMask YES NSString stringsPlistPath paths objectAtIndex 0 stringByAppendingPathComponent @ Strings.plist Create the array I am assuming the strings are..
Saving Array to Plist file that contains Custom Objects iPhone http://stackoverflow.com/questions/8111965/saving-array-to-plist-file-that-contains-custom-objects-iphone Array to Plist file that contains Custom Objects iPhone I have a class called XYZ inheriting from NSObject and an array which contains..
Using iOS SDK to create a plist at runtime? http://stackoverflow.com/questions/8447341/using-ios-sdk-to-create-a-plist-at-runtime be so that I can easily create the plist at runtime. iphone objective c ios plist share improve this question Plist files are mainly used by Mac OS X to store serialized objects in a key value manner. There are multiple kinds of Property.. from server you can generate plist at runtime. You can use the below code to write data in .plist file. void writeToPlist NSArray paths NSSearchPathForDirectoriesInDomains NSDocumentDirectory NSUserDomainMask YES NSString documentsDirectory paths..
Writing a new set of data to Plist instead of overwriting it http://stackoverflow.com/questions/8816792/writing-a-new-set-of-data-to-plist-instead-of-overwriting-it a new set of data to Plist instead of overwriting it I'm trying to get a plist to store multiple sets of data but each time I save using a button.. add multiple 'friends' and their data. I'm not too keen on using Core Data so I'm wondering how you can do it with a Plist. Here is the code for the save button NSMutableDictionary friend NSMutableDictionary alloc init NSMutableDictionary array..
http://stackoverflow.com/questions/9335475/iphone-read-write-plist-file the application will only work as long as I'm testing it in the iPhone simulator. I've tried this Changing Data in a Plist but without luck. I have also read something about that I need to add it to my bundle but how New code IBAction segmentControlChanged..
Easy way to see saved NSUserDefaults? http://stackoverflow.com/questions/1676938/easy-way-to-see-saved-nsuserdefaults I'd like to see if my data saved correctly. iphone nsuserdefaults share improve this question You can find the pList file for your app in the simulator if you go to users your user name Library Application Support iPhone Simulator Sim Version..
how to write NSMutableDictionary into Plist http://stackoverflow.com/questions/3984722/how-to-write-nsmutabledictionary-into-plist thanks in advance.. iphone objective c plist nsmutabledictionary share improve this question Make sure the pList file you are writing to is located in a legal place to edit it for example Documents in the apps sandbox. Then find the.. to edit it for example Documents in the apps sandbox. Then find the path to that location if there is an existing pList file it will overwrite and use myDictionary writeToFile path atomically YES Write how far you are in the process and maybe..
sectioned UITableView sourced from a pList http://stackoverflow.com/questions/4850659/sectioned-uitableview-sourced-from-a-plist UITableView sourced from a pList I'm having trouble finding a easy to understand tutorial on having a sectioned UITableView which gets its data from a pList.. I'm having trouble finding a easy to understand tutorial on having a sectioned UITableView which gets its data from a pList file. Things im having trouble with is how to properly structure the pList file to cater for 2 different sections. iphone.. UITableView which gets its data from a pList file. Things im having trouble with is how to properly structure the pList file to cater for 2 different sections. iphone objective c cocoa touch ios share improve this question The root of..
http://stackoverflow.com/questions/5019909/iphone-tableview-search-xml For some reason this was really hard to find documentation how to do this. Here's my RootViewController.m below. My pList is configured as Root Array Item0 Dictionary Name String Item1 Dictionary Name String .. Here's my code hopefully this helps..
Reporting incorrect bounds in landscape Mode http://stackoverflow.com/questions/5194504/reporting-incorrect-bounds-in-landscape-mode mode in my iPad application. I created a very small new project to show my issue I set UIInterfaceOrientation in the pList to UIInterfaceOrientationLandscapeRight In app delegate BOOL application UIApplication application didFinishLaunchingWithOptions..
How to Maintain VOIP socket connection in background? http://stackoverflow.com/questions/5987495/how-to-maintain-voip-socket-connection-in-background iphone sockets background voip share improve this question You also need to ensure that you have set the in your pList file key UIBackgroundModes key array string voip string array The socket will be managed by the iOS while your application..
How to use pList in iOS Programming http://stackoverflow.com/questions/7059966/how-to-use-plist-in-ios-programming to use pList in iOS Programming Recently I'm a senior in high school and I'm interested in making apps for iPhone. Recently one of my..
Writing a new set of data to Plist instead of overwriting it http://stackoverflow.com/questions/8816792/writing-a-new-set-of-data-to-plist-instead-of-overwriting-it a new set of friend data each time I save iphone ios nsmutablearray plist saving share improve this question Here pList behave as an one object. so whenever you try to write something to plist it will be replaced with new data. Look like you.. should work out. As per your requirement you should save NSArray with multiple NSDictionary friend record object to pList. Here is the modified code NSArray paths NSSearchPathForDirectoriesInDomains NSDocumentDirectory NSUserDomainMask YES NSString..
|