¡@
2014/10/15 ¤U¤È 10:13:30
iphone Programming Glossary: rootSetting action for back button in navigation controller http://stackoverflow.com/questions/1214965/setting-action-for-back-button-in-navigation-controller attribute it doesn't pay attention to them and it just pops the current view and goes back to the root UIBarButtonItem backButton UIBarButtonItem alloc initWithTitle @ Servers style UIBarButtonItemStylePlain.. backButton How can I get it to call my custom action before going back to the root view Is there a way to overwrite the default back action or is there a method that is always called..
http://stackoverflow.com/questions/2496554/easiest-way-to-support-multiple-orientations-how-do-i-load-a-custom-nib-when-th myViewController.xib exists in project Resources and myViewControllerLandscape.xib exists in the root project directory. What I want to do is use a separate NIB myViewControllerLandscape.xib for my rotations...
Build fat static library (device + simulator) using Xcode and SDK 4+ http://stackoverflow.com/questions/3520977/build-fat-static-library-device-simulator-using-xcode-and-sdk-4 missing platforms configurations. if true ALREADYINVOKED false then echo RECURSION I am NOT the root invocation so I'm NOT going to recurse else # CRITICAL # Prevent infinite recursion Xcode sucks export.. # Prevent infinite recursion Xcode sucks export ALREADYINVOKED true echo RECURSION I am the root ... recursing all missing build targets NOW... echo RECURSION ...about to invoke xcodebuild configuration..
http://stackoverflow.com/questions/37464/iphone-app-minus-app-store Continue Blank out the Email address field. Click Continue until complete. You should see This root certificate is not trusted . This is expected. Set the iPhone SDK to allow the self signed certificate.. with the hostname of the target device. Be sure to set your own password on both the mobile and root users after installing SSH. To manually compile and install your application on the phone as a system.. your preferred method to transfer this to Applications on the device. scp r AccelerometerGraph.app root@jasoniphone Applications Let SpringBoard know the new application has been installed ssh mobile@jasoniphone.local..
Why NSUserDefaults failed to save NSMutableDictionary in iPhone SDK? http://stackoverflow.com/questions/471830/why-nsuserdefaults-failed-to-save-nsmutabledictionary-in-iphone-sdk nscoding share improve this question I found out one alternative before save I encode the root object NSArray object using NSKeyedArchiver which ends with NSData. Then use UserDefaults save the NSData...
Tab bar controller inside a navigation controller, or sharing a navigation root view http://stackoverflow.com/questions/576764/tab-bar-controller-inside-a-navigation-controller-or-sharing-a-navigation-root bar controller inside a navigation controller or sharing a navigation root view I'm trying to implement a UI structured like in the Tweetie app which behaves as so the top level.. app which behaves as so the top level view controller seems to be a navigation controller whose root view is an Accounts table view. If you click on any account it goes to the second level which has a.. navigation controllers. The problem with this is that each nav controller needs to share a single root view controller namely the Accounts table in Tweetie this doesn't seem to work pushing the table controller..
Custom UINavigationBar Background http://stackoverflow.com/questions/704558/custom-uinavigationbar-background as I have an application built with the NavigationView template so it is not done in my root controller as per the example iphone objective c share improve this question You just have to overload..
Applications are expected to have a root view controller at the end of application launch http://stackoverflow.com/questions/7520971/applications-are-expected-to-have-a-root-view-controller-at-the-end-of-applicati are expected to have a root view controller at the end of application launch I get the following error in my console Applications.. of application launch I get the following error in my console Applications are expected to have a root view controller at the end of application launch Below is my application didFinishLaunchWithOptions.. Add the tab bar controller's current view as a subview of the window self.window.rootViewController self.tabBarController self.window makeKeyAndVisible return YES IN IB the tabBarController's..
iOS Launching Settings -> Restrictions URL Scheme http://stackoverflow.com/questions/8246070/ios-launching-settings-restrictions-url-scheme app from my application UIApplication sharedApplication openURL NSURL URLWithString @ prefs root General But cannot seem to route directly to the Restrictions path via the path parameter UIApplication.. path via the path parameter UIApplication sharedApplication openURL NSURL URLWithString @ prefs root General path Restrictions Has anyone found documentation on this or been able to make this work Any.. on it maybe it's just not found out yet. List of currently known URLs in the Settings app prefs root General path About prefs root General path ACCESSIBILITY prefs root AIRPLANE_MODE prefs root General..
How to use NSJSONSerialization http://stackoverflow.com/questions/8356842/how-to-use-nsjsonserialization structure I mentioned iphone objective c json nsdictionary share improve this question Your root json object is not a dictionary but an array id 1 name Aaa id 2 name Bbb This might give you a clear..
Transparent Modal View on Navigation Controller http://stackoverflow.com/questions/849458/transparent-modal-view-on-navigation-controller You can verify this by implementing the viewWillDisappear and viewDidDisappear methods in your root view controller . You can add the modal view directly to the view hierarchy like so UIView modalView.. modalView addSubview label self.view addSubview modalView Adding the modalView as a subview to the root view like this will not actually cover the navigation bar but it will cover the entire view below it...
View Controllers: How to switch between views programmatically? http://stackoverflow.com/questions/910994/view-controllers-how-to-switch-between-views-programmatically by hand for learning what's going on under the hood. I have an UIViewController that acts as an root controller @interface MyRootController UIViewController IBOutlet UIView contentView @property nonatomic..
Setting action for back button in navigation controller http://stackoverflow.com/questions/1214965/setting-action-for-back-button-in-navigation-controller The odd thing is when assigning it though the backbutton attribute it doesn't pay attention to them and it just pops the current view and goes back to the root UIBarButtonItem backButton UIBarButtonItem alloc initWithTitle @ Servers style UIBarButtonItemStylePlain target self action @selector home self.navigationItem.backBarButtonItem.. round one instead of the arrowed back one self.navigationItem.leftBarButtonItem backButton How can I get it to call my custom action before going back to the root view Is there a way to overwrite the default back action or is there a method that is always called when leaving a view viewDidUnload doesn't do that iphone cocoa..
http://stackoverflow.com/questions/2496554/easiest-way-to-support-multiple-orientations-how-do-i-load-a-custom-nib-when-th use myViewController.xib and myViewControllerLandscape.xib. myViewController.xib exists in project Resources and myViewControllerLandscape.xib exists in the root project directory. What I want to do is use a separate NIB myViewControllerLandscape.xib for my rotations. I try detecting rotation in viewDidLoad l ike this if..
Build fat static library (device + simulator) using Xcode and SDK 4+ http://stackoverflow.com/questions/3520977/build-fat-static-library-device-simulator-using-xcode-and-sdk-4 if you try this infinite recursion # # # So build ONLY the missing platforms configurations. if true ALREADYINVOKED false then echo RECURSION I am NOT the root invocation so I'm NOT going to recurse else # CRITICAL # Prevent infinite recursion Xcode sucks export ALREADYINVOKED true echo RECURSION I am the root ... recursing.. the root invocation so I'm NOT going to recurse else # CRITICAL # Prevent infinite recursion Xcode sucks export ALREADYINVOKED true echo RECURSION I am the root ... recursing all missing build targets NOW... echo RECURSION ...about to invoke xcodebuild configuration CONFIGURATION project PROJECT_NAME .xcodeproj target TARGET_NAME..
http://stackoverflow.com/questions/37464/iphone-app-minus-app-store override defaults Yes Click Continue Validity 3650 days Click Continue Blank out the Email address field. Click Continue until complete. You should see This root certificate is not trusted . This is expected. Set the iPhone SDK to allow the self signed certificate to be used sudo usr bin sed i .bak 's XCiPhoneOSCodeSignContext.. uikittools to be installed first. Replace jasoniphone.local with the hostname of the target device. Be sure to set your own password on both the mobile and root users after installing SSH. To manually compile and install your application on the phone as a system app bypassing Apple's installation system Project Set Active.. Release iphoneos directory you will have an app bundle. Use your preferred method to transfer this to Applications on the device. scp r AccelerometerGraph.app root@jasoniphone Applications Let SpringBoard know the new application has been installed ssh mobile@jasoniphone.local uicache This only has to be done when you add..
Why NSUserDefaults failed to save NSMutableDictionary in iPhone SDK? http://stackoverflow.com/questions/471830/why-nsuserdefaults-failed-to-save-nsmutabledictionary-in-iphone-sdk solution for this iphone objective c cocoa touch nsuserdefaults nscoding share improve this question I found out one alternative before save I encode the root object NSArray object using NSKeyedArchiver which ends with NSData. Then use UserDefaults save the NSData. When I need the data I read out the NSData and use NSKeyedUnarchiver..
Tab bar controller inside a navigation controller, or sharing a navigation root view http://stackoverflow.com/questions/576764/tab-bar-controller-inside-a-navigation-controller-or-sharing-a-navigation-root bar controller inside a navigation controller or sharing a navigation root view I'm trying to implement a UI structured like in the Tweetie app which behaves as so the top level view controller seems to be a navigation controller whose.. I'm trying to implement a UI structured like in the Tweetie app which behaves as so the top level view controller seems to be a navigation controller whose root view is an Accounts table view. If you click on any account it goes to the second level which has a tab bar across the bottom. Each tab item shows a different list.. main controller with each of the tabs containing separate navigation controllers. The problem with this is that each nav controller needs to share a single root view controller namely the Accounts table in Tweetie this doesn't seem to work pushing the table controller to a second nav controller seems to remove it from the..
Custom UINavigationBar Background http://stackoverflow.com/questions/704558/custom-uinavigationbar-background as a new class Also where do I instatiate the NavigationController as I have an application built with the NavigationView template so it is not done in my root controller as per the example iphone objective c share improve this question You just have to overload drawRect like that @implementation UINavigationBar CustomImage..
Applications are expected to have a root view controller at the end of application launch http://stackoverflow.com/questions/7520971/applications-are-expected-to-have-a-root-view-controller-at-the-end-of-applicati are expected to have a root view controller at the end of application launch I get the following error in my console Applications are expected to have a root view controller at the end of.. are expected to have a root view controller at the end of application launch I get the following error in my console Applications are expected to have a root view controller at the end of application launch Below is my application didFinishLaunchWithOptions method BOOL application UIApplication application didFinishLaunchingWithOptions.. sharedApplication setStatusBarStyle UIStatusBarStyleBlackTranslucent Add the tab bar controller's current view as a subview of the window self.window.rootViewController self.tabBarController self.window makeKeyAndVisible return YES IN IB the tabBarController's delegate is hooked up to the App Delegate. Any know how..
iOS Launching Settings -> Restrictions URL Scheme http://stackoverflow.com/questions/8246070/ios-launching-settings-restrictions-url-scheme app I've found this to work directing the user to the Settings app from my application UIApplication sharedApplication openURL NSURL URLWithString @ prefs root General But cannot seem to route directly to the Restrictions path via the path parameter UIApplication sharedApplication openURL NSURL URLWithString @ prefs root.. General But cannot seem to route directly to the Restrictions path via the path parameter UIApplication sharedApplication openURL NSURL URLWithString @ prefs root General path Restrictions Has anyone found documentation on this or been able to make this work Any insight would be greatly appreciated. I'm trying to take the.. a URL. I found a list of possible URLs and Restrictions is not on it maybe it's just not found out yet. List of currently known URLs in the Settings app prefs root General path About prefs root General path ACCESSIBILITY prefs root AIRPLANE_MODE prefs root General path AUTOLOCK prefs root General path USAGE CELLULAR_USAGE..
How to use NSJSONSerialization http://stackoverflow.com/questions/8356842/how-to-use-nsjsonserialization to parse the JSON above and turn it into the data structure I mentioned iphone objective c json nsdictionary share improve this question Your root json object is not a dictionary but an array id 1 name Aaa id 2 name Bbb This might give you a clear picture of how to handle it NSError e nil NSArray jsonArray..
Transparent Modal View on Navigation Controller http://stackoverflow.com/questions/849458/transparent-modal-view-on-navigation-controller which makes any transparency of your modal view pointless. You can verify this by implementing the viewWillDisappear and viewDidDisappear methods in your root view controller . You can add the modal view directly to the view hierarchy like so UIView modalView UIView alloc initWithFrame UIScreen mainScreen bounds autorelease.. 2 modalView.frame.size.height 2 modalView addSubview label self.view addSubview modalView Adding the modalView as a subview to the root view like this will not actually cover the navigation bar but it will cover the entire view below it. I tried playing around with the origin of the frame used to..
View Controllers: How to switch between views programmatically? http://stackoverflow.com/questions/910994/view-controllers-how-to-switch-between-views-programmatically Controller but I dont want to. I want to see how this is done by hand for learning what's going on under the hood. I have an UIViewController that acts as an root controller @interface MyRootController UIViewController IBOutlet UIView contentView @property nonatomic retain UIView contentView @end The contentView is hooked..
Setting action for back button in navigation controller http://stackoverflow.com/questions/1214965/setting-action-for-back-button-in-navigation-controller the backbutton attribute it doesn't pay attention to them and it just pops the current view and goes back to the root UIBarButtonItem backButton UIBarButtonItem alloc initWithTitle @ Servers style UIBarButtonItemStylePlain target self.. self.navigationItem.leftBarButtonItem backButton How can I get it to call my custom action before going back to the root view Is there a way to overwrite the default back action or is there a method that is always called when leaving a view..
http://stackoverflow.com/questions/2496554/easiest-way-to-support-multiple-orientations-how-do-i-load-a-custom-nib-when-th myViewController.xib exists in project Resources and myViewControllerLandscape.xib exists in the root project directory. What I want to do is use a separate NIB myViewControllerLandscape.xib for my rotations. I try detecting..
Build fat static library (device + simulator) using Xcode and SDK 4+ http://stackoverflow.com/questions/3520977/build-fat-static-library-device-simulator-using-xcode-and-sdk-4 # # So build ONLY the missing platforms configurations. if true ALREADYINVOKED false then echo RECURSION I am NOT the root invocation so I'm NOT going to recurse else # CRITICAL # Prevent infinite recursion Xcode sucks export ALREADYINVOKED true.. to recurse else # CRITICAL # Prevent infinite recursion Xcode sucks export ALREADYINVOKED true echo RECURSION I am the root ... recursing all missing build targets NOW... echo RECURSION ...about to invoke xcodebuild configuration CONFIGURATION..
http://stackoverflow.com/questions/37464/iphone-app-minus-app-store 3650 days Click Continue Blank out the Email address field. Click Continue until complete. You should see This root certificate is not trusted . This is expected. Set the iPhone SDK to allow the self signed certificate to be used sudo usr.. jasoniphone.local with the hostname of the target device. Be sure to set your own password on both the mobile and root users after installing SSH. To manually compile and install your application on the phone as a system app bypassing Apple's.. an app bundle. Use your preferred method to transfer this to Applications on the device. scp r AccelerometerGraph.app root@jasoniphone Applications Let SpringBoard know the new application has been installed ssh mobile@jasoniphone.local uicache..
Why NSUserDefaults failed to save NSMutableDictionary in iPhone SDK? http://stackoverflow.com/questions/471830/why-nsuserdefaults-failed-to-save-nsmutabledictionary-in-iphone-sdk touch nsuserdefaults nscoding share improve this question I found out one alternative before save I encode the root object NSArray object using NSKeyedArchiver which ends with NSData. Then use UserDefaults save the NSData. When I need the..
Tab bar controller inside a navigation controller, or sharing a navigation root view http://stackoverflow.com/questions/576764/tab-bar-controller-inside-a-navigation-controller-or-sharing-a-navigation-root bar controller inside a navigation controller or sharing a navigation root view I'm trying to implement a UI structured like in the Tweetie app which behaves as so the top level view controller.. like in the Tweetie app which behaves as so the top level view controller seems to be a navigation controller whose root view is an Accounts table view. If you click on any account it goes to the second level which has a tab bar across the bottom... containing separate navigation controllers. The problem with this is that each nav controller needs to share a single root view controller namely the Accounts table in Tweetie this doesn't seem to work pushing the table controller to a second..
Custom UINavigationBar Background http://stackoverflow.com/questions/704558/custom-uinavigationbar-background the NavigationController as I have an application built with the NavigationView template so it is not done in my root controller as per the example iphone objective c share improve this question You just have to overload drawRect like..
Applications are expected to have a root view controller at the end of application launch http://stackoverflow.com/questions/7520971/applications-are-expected-to-have-a-root-view-controller-at-the-end-of-applicati are expected to have a root view controller at the end of application launch I get the following error in my console Applications are expected to have.. at the end of application launch I get the following error in my console Applications are expected to have a root view controller at the end of application launch Below is my application didFinishLaunchWithOptions method BOOL application.. UIStatusBarStyleBlackTranslucent Add the tab bar controller's current view as a subview of the window self.window.rootViewController self.tabBarController self.window makeKeyAndVisible return YES IN IB the tabBarController's delegate is hooked..
iOS Launching Settings -> Restrictions URL Scheme http://stackoverflow.com/questions/8246070/ios-launching-settings-restrictions-url-scheme the user to the Settings app from my application UIApplication sharedApplication openURL NSURL URLWithString @ prefs root General But cannot seem to route directly to the Restrictions path via the path parameter UIApplication sharedApplication.. to the Restrictions path via the path parameter UIApplication sharedApplication openURL NSURL URLWithString @ prefs root General path Restrictions Has anyone found documentation on this or been able to make this work Any insight would be greatly.. Restrictions is not on it maybe it's just not found out yet. List of currently known URLs in the Settings app prefs root General path About prefs root General path ACCESSIBILITY prefs root AIRPLANE_MODE prefs root General path AUTOLOCK prefs..
How to use NSJSONSerialization http://stackoverflow.com/questions/8356842/how-to-use-nsjsonserialization turn it into the data structure I mentioned iphone objective c json nsdictionary share improve this question Your root json object is not a dictionary but an array id 1 name Aaa id 2 name Bbb This might give you a clear picture of how to handle..
Transparent Modal View on Navigation Controller http://stackoverflow.com/questions/849458/transparent-modal-view-on-navigation-controller modal view pointless. You can verify this by implementing the viewWillDisappear and viewDidDisappear methods in your root view controller . You can add the modal view directly to the view hierarchy like so UIView modalView UIView alloc initWithFrame.. 2 modalView addSubview label self.view addSubview modalView Adding the modalView as a subview to the root view like this will not actually cover the navigation bar but it will cover the entire view below it. I tried playing around..
View Controllers: How to switch between views programmatically? http://stackoverflow.com/questions/910994/view-controllers-how-to-switch-between-views-programmatically see how this is done by hand for learning what's going on under the hood. I have an UIViewController that acts as an root controller @interface MyRootController UIViewController IBOutlet UIView contentView @property nonatomic retain UIView contentView..
NSFetchedResultsController with sections created by first letter of a string http://stackoverflow.com/questions/1112521/nsfetchedresultscontroller-with-sections-created-by-first-letter-of-a-string fetchRequest managedObjectContext managedObjectContext sectionNameKeyPath @ personName cacheName @ Root .... iphone ios objective c core data share improve this question Dave DeLong's approach is good at least in my case.. fetchRequest managedObjectContext managedObjectContext sectionNameKeyPath @ committeeNameInitial cacheName @ Root PREVIOUSLY Following Dave's initial steps to the letter generated issues where it dies upon setPropertiesToFetch with an..
Iphone Core Data crashing on Save http://stackoverflow.com/questions/1230858/iphone-core-data-crashing-on-save loadHTMLString @ html head head body body html baseURL NSURL URLWithString @ self.navigationController popToRootViewControllerAnimated YES And here's the crash log Exception Type EXC_BAD_ACCESS SIGBUS Exception Codes KERN_PROTECTION_FAILURE.. out the save line the code runs fine now. But it doesn't save after i close and exit. If I run the save line in my Root View Controllers willAppear function it throws the same EXC_BAD_ACCESS error. The console doesn't say anything other than.. _NSInternalAdditions _didSaveChanges #6 0x368133c2 in NSManagedObjectContext save #7 0x0000314e in RootViewController viewWillAppear self 0x11b560 _cmd 0x3014ecac animated 1 ' 001' at Users inckbmj Desktop iphone Decome Classes..
Using custom sections with NSFetchedResultsController? http://stackoverflow.com/questions/1384345/using-custom-sections-with-nsfetchedresultscontroller fetchRequest managedObjectContext managedObjectContext sectionNameKeyPath @ myDateAttribute.daysAgo cacheName @ Root Here's where I'm stuck I don't need them sorted by days ago I need them sorted via some calculations based on other attributes..
Core Data backed UITableView with indexing http://stackoverflow.com/questions/1599204/core-data-backed-uitableview-with-indexing managedObjectContext managedObjectContext sectionNameKeyPath @ name this key defines the sections cacheName @ Root aFetchedResultsController.delegate self self.fetchedResultsController aFetchedResultsController Then you can get the section..
How to use the first character as a section name http://stackoverflow.com/questions/1741093/how-to-use-the-first-character-as-a-section-name fetchRequest managedObjectContext managedObjectContext sectionNameKeyPath @ name.firstLetter cacheName @ Root Thanks. EDIT I'm not sure if it makes a difference but my results are Japanese sorted by Katakana. I want to use these Katakana.. managedObjectContext sectionNameKeyPath @ uppercaseFirstLetterOfName this key defines the sections cacheName @ Root And to uncomment tableView titleForHeaderInSection in the UITableViewDataSource implementation NSString tableView UITableView..
Create XML file dynamically in Iphone http://stackoverflow.com/questions/1825605/create-xml-file-dynamically-in-iphone allocate serializer XMLWriter xmlWriter XMLWriter alloc init start writing XML elements xmlWriter writeStartElement @ Root xmlWriter writeCharacters @ Text content for root element xmlWriter writeEndElement get the resulting XML string NSString..
Is parentViewController always a Navigation controller? http://stackoverflow.com/questions/244588/is-parentviewcontroller-always-a-navigation-controller that is driven by a UINavigationController. In the AppDelegate I create an instance of this class using page 1 as the Root View Controller. UINavigationController aNavigationController UINavigationController alloc initWithRootViewController page1ViewController.. page 1 as the Root View Controller. UINavigationController aNavigationController UINavigationController alloc initWithRootViewController page1ViewController Now here's where I'm having the problem. From page 1 I'd like to use a modal view controller..
Automatically Sizing UIView after Adding to Window http://stackoverflow.com/questions/2659400/automatically-sizing-uiview-after-adding-to-window Sizing UIView after Adding to Window Note This may be a duplicate of Subview Doesnt AutoSize When Added to Root View Controller I have an iPad app that switches between different views in its main window. The view switching code looks..
How to refresh UITableView after app comes becomes active again? http://stackoverflow.com/questions/3300694/how-to-refresh-uitableview-after-app-comes-becomes-active-again current UITableView UPDATE My UITableView is a separate controller. It is actually presented as follows AppDelegate Root View Controller Pushes UITabBarController modally which has a UITableViewController iphone objective c cocoa touch uitableview..
How can I write to a plist file? http://stackoverflow.com/questions/4116179/how-can-i-write-to-a-plist-file small bit of code to write to a plist file. I am not getting any errors or warnings from XCode so I am really lost. Root is not defined in this code section but it is just a dictionary of the data that I pulled from the plist. Does anyone have.. file It literally does not change the file at all. NSMutableArray newReports NSMutableArray alloc init newReports Root objectForKey @ Reports mutableCopy Creating data model for new report NSMutableDictionary newReport NSMutableDictionary.. forKey @ Employee newReport setObject tempNodes forKey @ Nodes newReports addObject newReport NSMutableDictionary newRoot NSMutableDictionary alloc init newRoot setObject newReports forKey @ Reports Writing data to plist NSString Path NSBundle..
http://stackoverflow.com/questions/5525436/xcode-could-not-find-a-valid-private-certificate-valid-key-pair-for-this-profile reply to @baudot's comment below. It wouldn't fit in a comment Make sure you also have the Apple Developer Relations Root CA certificate in your keychain. That is what is used to verify the certificate. You could also opt for a fresh start. Just..
plist in xcode creation problem http://stackoverflow.com/questions/6693333/plist-in-xcode-creation-problem 8 DOCTYPE plist PUBLIC Apple DTD PLIST 1.0 EN http www.apple.com DTDs PropertyList 1.0.dtd plist version 1.0 dict key Root key array string Firecracker string string Lemon Drop string string Mojito string array dict plist Here you are having unnecessary..
http://stackoverflow.com/questions/6851660/version-vs-build-in-xcode-4 file. There are optional additional steps if you want to write your version build numbers to your Settings.bundle Root .plist file s . This is extended from the how to article here . In Xcode 4.2 5.0 Load your Xcode project. In the left hand.. INFOPLIST_FILE usr libexec PlistBuddy c Set PreferenceSpecifiers 2 DefaultValue buildNumber Settings.bundle Root.plist usr libexec PlistBuddy c Set PreferenceSpecifiers 1 DefaultValue productVersion Settings.bundle Root.plist If you're.. Root.plist usr libexec PlistBuddy c Set PreferenceSpecifiers 1 DefaultValue productVersion Settings.bundle Root.plist If you're using agvtool instead of reading the Info.plist directly you can add the following to your script instead..
Capturing mobile phone traffic on wireshark http://stackoverflow.com/questions/9555403/capturing-mobile-phone-traffic-on-wireshark ios networking wireshark share improve this question Here are some suggestions For Android phones any network Root your phone then install tcpdump on it. This app is a tcpdump wrapper that will install tcpdump and enable you to start captures..
|