¡@

Home 

c# Programming Glossary: netsh

HTTPS from a console application?

http://stackoverflow.com/questions/10274207/https-from-a-console-application

getThumb.thumbprint Register and map WCF port with netsh Map to WCF port netsh http add sslcert ipport 0.0.0.0 8000 certhash.. Register and map WCF port with netsh Map to WCF port netsh http add sslcert ipport 0.0.0.0 8000 certhash 73269e9b554f58d75e77880f5ff72b50c8d724ee.. bind certificate to port Stack Overflow question Using netsh bind an SSL certificate to a port number is failing Stack Overflow..

Get BSSID (MAC address) of wireless access point from C#

http://stackoverflow.com/questions/187777/get-bssid-mac-address-of-wireless-access-point-from-c-sharp

The following needs to be executed programmatically netsh wlan show networks mode Bssid findstr BSSID The above shows..

Querying a DHCP server in C#

http://stackoverflow.com/questions/2224877/querying-a-dhcp-server-in-c-sharp

a program running on one of the DHCP clients. I understand netsh utility can be used to get the dump however i have not had much.. that information to map MAC to IP address c# windows dhcp netsh dhcpobjs share improve this question You can use the DHCP..

IIS Express enable external request

http://stackoverflow.com/questions/3313616/iis-express-enable-external-request

run the following command from an administrative prompt netsh http add urlacl url http vaidesg 8080 user everyone For XP first..

Is IP address on the same subnet as the local machine (with IPv6 support)

http://stackoverflow.com/questions/3679652/is-ip-address-on-the-same-subnet-as-the-local-machine-with-ipv6-support

application. The best way might be to parse the output of netsh interface ipv6 show route verbose . You could look for any non.. to the box You could also check the neighbor table. netsh interface ipv6 show neighbors but that might not contain the.. It's not clear how to test for this under Windows but netsh interface ipv6 show siteprefixes might help. It looks like Windows..

Listen for ICMP packets in C#

http://stackoverflow.com/questions/626541/listen-for-icmp-packets-in-c-sharp

to allow ICMP Port Unreachable packets to be received. netsh advfirewall firewall add rule name All ICMP v4 dir in action..

Best way to programmatically configure network adapters in .NET

http://stackoverflow.com/questions/689230/best-way-to-programmatically-configure-network-adapters-in-net

improve this question You could use Process to fire off netsh commands to set all the properties in the network dialogs. eg.. dialogs. eg To set a static ipaddress on an adapter netsh interface ip set address Local Area Connection static 192.168.0.10.. 255.255.255.0 192.168.0.1 1 To set it to dhcp you'd use netsh interface ip set address Local Area Connection dhcp To do it..

WCF ServiceHost access rights

http://stackoverflow.com/questions/885744/wcf-servicehost-access-rights

command prompt as an administrator. Add the URL to the ACL netsh http add urlacl url http 8000 ServiceModelSamples Service user..